Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

paging

Status
Not open for further replies.

phoneguy610

Programmer
Apr 3, 2009
1,584
US
ip office 8.0.46

upgraded partner to ipo

paging amplifier was plugged into paging port on partner

ive tried everything i could find

set it to paging speaker and went off hook with my test set rebooted (did not work)

changed it to an IVR port and all i got was dial tone on the speaker

changed it to analog handset and just got dial tone on the speaker


any ideas?

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS
 
why is that? this has the interface for paging

they have a bogen tpu 100b

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS
 
Thats an amplifier. This is a piece of equipment that sits between the IPO and the Amp. You can set it to do a CO or Analog station integration with the IP Office.
 
is that the only solution?

i have read other threads were people seem to get it working without such a device

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS
 
Yes.

I am not sure what they have done, could have been a different amplifier.
 
got it working without this device

went off hook with my test set
plugged paging back in

created shortcode dial paging

this worked

thanks for the input otherwise

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top