Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging port is busy even after Bogen UTI 1 is unhooked 1

Status
Not open for further replies.

voxvar

Programmer
Nov 18, 2011
199
US
All was working well but now the port is busy when called. With nothing connected it still gives busy. Any help would be appreciated.

10888965mS CMTARGET: 291.1802.0 249 Test Phone.0: Setting Hard Timer 3000
10888966mS CMTARGET: 291.1802.0 249 Test Phone.0: LOOKUP CALL ROUTE: type=100 called_party=4 sub= calling=302 dir=out complete=0 ses=0
10888966mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD TARGET (N): number=4 type=100 depth=1 nobar=1 setorig=1 ses=0
10888968mS CMMap: a=0.0 b=0.0 pcp[625]b0r1 RTPD0
10888968mS H323Evt: SetOperational 203 192.168.0.55:49154 to 0
10889213mS PRN: 302: Digit Pressed 4
10889214mS CMExtnRx: v=302, p1=0
CMInformation
Line: type=IPLine 250 Call: lid=291 id=1802 in=0
Called[4] Type=Default (100) Reason=CMDRdirect Keypad[4]
10889214mS CMTARGET: 291.1802.0 249 Test Phone.0: Setting Hard Timer 3000
10889214mS CMTARGET: 291.1802.0 249 Test Phone.0: LOOKUP CALL ROUTE: type=100 called_party=44 sub= calling=302 dir=out complete=0 ses=0
10889215mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD TARGET (N): number=44 type=100 depth=1 nobar=1 setorig=1 ses=0
10889434mS H323Evt: Recv: RegistrationRequest 192.168.0.155; Endpoints registered: 39; Endpoints in registration: 0
10889453mS PRN: 302: Digit Pressed 4
10889454mS CMExtnRx: v=302, p1=0
CMInformation
Line: type=IPLine 250 Call: lid=291 id=1802 in=0
Called[4] Type=Default (100) Reason=CMDRdirect Keypad[4]
10889454mS CMTARGET: 291.1802.0 249 Test Phone.0: Setting Hard Timer 3000
10889454mS CMTARGET: 291.1802.0 249 Test Phone.0: LOOKUP CALL ROUTE: type=100 called_party=444 sub= calling=302 dir=out complete=0 ses=0
10889455mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD TARGET (N): number=444 type=100 depth=1 nobar=1 setorig=1 ses=0
10889455mS CMTARGET: 291.1802.0 249 Test Phone.0: SET USER: Paging orig=1
10889455mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD USER: Paging depth=1 disallow_cw=0 dnd=0 real_call=1 group_call=0 type(CMNTypeDefault) incl(0x0) excpt(0x0), allow_redir(1) remote=00000000 simult 0 (0)
10889455mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD TARGET (N): number=59 type=100 depth=2 nobar=1 setorig=0 ses=0
10889456mS CMTARGET: 291.1802.0 249 Test Phone.0: SYS SC: 59 2 sc=type=DialPaging code=59, num=416 callinfop->sending_complete=1 secondary_dialtone=
10889456mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD TARGET (N): number=416 type=104 depth=3 nobar=1 setorig=0 ses=0
10889456mS CMTARGET: 291.1802.0 249 Test Phone.0: SET USER: Page orig=0
10889456mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD USER: Page depth=3 disallow_cw=0 dnd=0 real_call=0 group_call=0 type(CMNTypePaging) incl(0x8) excpt(0x0), allow_redir(1) remote=00000000 simult 0 (0)
10889457mS CMCallEvt: 0.1804.0 -1 BaseEP: NEW CMEndpoint f4f9f2b0 TOTAL NOW=7 CALL_LIST=3
10889457mS CMCallEvt: 0.1804.0 -1 PagingEP 416: StateChange: END=X CMCSIdle->CMCSDelete
10889457mS CMCallEvt: 0.1804.0 -1 BaseEP: DELETE CMEndpoint f4f9f2b0 TOTAL NOW=6 CALL_LIST=3
10889457mS CMTARGET: 291.1802.0 249 Test Phone.0: SET USER: Paging orig=0
10889458mS CMTARGET: 291.1802.0 249 Test Phone.0: CancelTimer CMTCDelayedProcessing
10889458mS CMTARGET: 291.1802.0 249 Test Phone.0: NO INITIAL TARGETS: Paging
10889458mS CMTARGET: 291.1802.0 249 Test Phone.0: ADD USER: Paging depth=1 disallow_cw=0 dnd=0 real_call=0 group_call=0 type(CMNTypePaging) incl(0x48) excpt(0x48), allow_redir(1) remote=00000000 simult 0 (0)
10889458mS CMTARGET: 291.1802.0 249 Test Phone.0: Fallback() targeting failed
10889459mS CMLOGGING: CALL:2013/04/3011:41,00:00:00,000,302,O,444,444,TestPhone,,,1,,""n/a,0
10889459mS CD: CALL: 291.1802.0 BState=Idle Cut=0 Music=0.0 Aend="Test Phone(302)" (0.0) Bend="Paging(444)" [] (0.0) CalledNum=444 (Paging) CallingNum=302 (Test Phone) Internal=1 Time=952 AState=Dialling
10889459mS CD: CALL: 291.1802.0 Deleted
10889460mS CMExtnEvt: Test Phone: CALL LOST (CMCauseBusy)
10889460mS CMExtnEvt: Test Phone: Extn(302) Calling Party Number(302) Type(CMNTypeInternal)
10889460mS CMCallEvt: 291.1802.0 -1 Test Phone.0: StateChange: END=X CMCSDialling->CMCSCompletedTone
10889460mS CMExtnEvt: v=41 State, new=CMESCompleted old=Dialling,0,0,Test Phone
10889461mS CMCallEvt: 0.1803.0 -1 BaseEP: DELETE CMEndpoint f4f82840 TOTAL NOW=5 CALL_LIST=2
10889461mS CMCallEvt: END CALL:249 (f4f83d0c)
10889463mS CMMap: PCG::AddToneGenerator g B1[4] for cp[625]b0r1 append pcp[627]b0r1 (total 1)
10889463mS CMMap: PlatformConnectionAudioSAP::ConnectVoice pcp[627]b0r1 Configure 0.0
10889463mS CMMap: PlatformConnectionAudioSAP::ConnectVoice pcp[627]b0r1 ConnectIndication 0.0
10889463mS CMMap: a=0.0 b=0.0 pcp[625]b0r1 RTPB1
10889463mS H323Evt: SetOperational 203 192.168.0.55:49154 to 1
10890083mS H323Evt: Recv: RegistrationRequest 192.168.0.136; Endpoints registered: 39; Endpoints in registration: 0
10890141mS H323Evt: RTP(50r): 192.168.0.55/49154 192.168.0.128/52912 CODEC=Ulaw64K(5) PKTSZ=160 RFC2833=off AGE=1622 SENT=55 (avg size=160) RECV=50 (avg size=160)
10890157mS CMExtnEvt: Chantal: No user activity
10890198mS CMExtnEvt: Shipping: No user activity
10891427mS H323Evt: Recv: RegistrationRequest 192.168.0.171; Endpoints registered: 39; Endpoints in registration: 0
10891522mS CMExtnTx: v=302, p1=8040
CMFacility
Line: type=IPLine 250 Call: lid=291 id=41 in=1
IE CMIEFastStartInfoData (6) 2 item(s)
10891523mS CMExtnRx: v=302, p1=0
CMReleaseComp
Line: type=IPLine 250 Call: lid=291 id=1802 in=0
10891523mS CMCallEvt: 291.1802.0 -1 Test Phone.0: StateChange: END=X CMCSCompletedTone->CMCSCompleted
10891523mS CMExtnEvt: v=41 State, new=PortRecoverDelay old=CMESCompleted,0,0,Test Phone
10891524mS CMExtnEvt: Test Phone: CALL LOST (CMCauseForceClear)
10891524mS CMExtnEvt: Test Phone: Extn(302) Calling Party Number(302) Type(CMNTypeInternal)
10891524mS CMExtnEvt: Test Phone: CMExtnHandler::SetCurrent( id: 1802->0 )
10891525mS CMCallEvt: 291.1802.0 -1 Test Phone.-1: StateChange: END=X CMCSCompleted->CMCSDelete
10891526mS CMTARGET: 291.1802.0 -1 BaseEP: ~CMTargetHandler f4f800c0 ep f4f849c0
10891526mS CMCallEvt: 291.1802.0 -1 BaseEP: DELETE CMEndpoint f4f849c0 TOTAL NOW=4 CALL_LIST=2
10891528mS CMMap: a=0.0 b=0.0 pcp[625]b0r1 RTPB0
10891528mS H323Evt: SetOperational 203 192.168.0.55:49154 to 0
10891528mS H323Evt: RTP(END): 192.168.0.55/49154 192.168.0.128/52912 CODEC=Ulaw64K(5) PKTSZ=160 RFC2833=off AGE=3009 SENT=125 RECV=119 RTdelay=0 jitter=0 loss=0 remotejitter=0 remoteloss=0
10892466mS H323Evt: Recv: RegistrationRequest 192.168.0.180; Endpoints registered: 39; Endpoints in registration: 0
 
I need to add this is a IPO 8.1 using a analog phone card 8
 
It will give a busy if nothing is hooked up. To test do the following. Connect your test set to page port, go of hook, then do your page.
 
I will try that, I don't know why it stopped working in the beginning
 
Hi the issue is because IPO dont see that you page adaptor is connected(too less imedance) , try to add a 1000 ohms 1/2 watts resistor in paralell with the IPO analog port an it will be ok
 
I have made this work the same way using an 600 ohm resistor

acss sme acis sme acss cm 5.2.1 acss cm and cmm
 
Would you put the resistor on the tip side of the analog port?
 
Question...have you used this with a Bogen UTI1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top