Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outgoing CLID issue on PRI

Status
Not open for further replies.
frecomm

frecomm

Vendor
Oct 22, 2009
59
US
Hey all,
I have a random issue happening on a MICS 6.0 with PRI. Usually, any calls made outbound show on the receiver's caller ID with the main business number and the business name. Occasionally, the caller ID shows the main business number but shows the name of one of the employees at the business. I have verified that none of the extensions have OLI enabled. I have done test calls from every trunk in the circuit, but have been unable to duplicate. Also, the only names in the system are in the Call Pilot. None of the extensions are named. Has anyone run into anything like this before? Is it possible that name information from the CP is making its way onto outbound caller ID? Thanks in advance.
 
Sort by date Sort by votes
The only place outbound CLID come from is the Telco, OLI, the business and the DN name. How could the CLID possibly be inserting an employee name if you have none programmed any?

Marv ccna
Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990
 
Upvote 0 Downvote
I have nothing input in the Business Name field.
 
Upvote 0 Downvote
I recently removed that employee's name from the CP and the issue is still occurring. I have triple verified that none of the DN are named. I am stumped.
 
Upvote 0 Downvote
Are you sure programming is taking?
i.e. call each other internally and see if a name does in fact show up.

Check the name carefully when calling outbound, if more than 7 characters you know its not the MICS.....but still weird.




=----(((((((((()----=
curlycord

small-logo-sig.png

Toronto Canada
 
Upvote 0 Downvote
Check who is saying they see the name when they get called it could be programed into the called party's system or cell phone speed dial.
 
Upvote 0 Downvote
I had that thought also. But one of the people reporting it is one of the main partners in the business who is seeing it at his residence on a personal land line. Haven't verified if it is POTS or VOIP yet.
 
Upvote 0 Downvote
It is just one employee. And I took his name out of the CP. Haven't done a reboot yet though. We did about 60 test calls to my office and never duplicated it. Next time I'm onsite, I will call my house just for testing purposes as well as perform the reboot.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
Nortel Meridian w/ Norstar Flash CCR issue 2
Replies
11
Views
1K
Synapt
S
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
662
Nortel dino
N
Rick The Geek
  • Locked
  • Question
PRI Keycode availability
Replies
4
Views
132
Rick The Geek
Rick The Geek
potrocito
  • Locked
  • Question
MICS 6.1 Incomplete CLID after STIR/SHAKEN 2
Replies
2
Views
118
exsmogger
exsmogger
cotech1950
  • Locked
  • Question
Cap issue on MICS 4.1
Replies
2
Views
107
cotech1950
cotech1950

Part and Inventory Search

Sponsor

Back
Top