Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outbound calls work for some, not all 3

Status
Not open for further replies.

MikeArcade

Technical User
Oct 15, 2007
97
US
Opt11 4.5 DID range 3100 - 3199
Phones programmed with extensions inside DID range cannot make outbound calls. Returns fast busy tone. D-Channel message shows call rejected.
Phones programmed outside of this range can call out without problems
I can program a phone with 31xx and call fails, change key 0 to 32xx and success. D-Channel message shows call processed.
Same phone same TGAR and NCOS. Same with local and LD calls.
I am at a loss guys. All help is appreciated and i am feeling generous with stars...

Michael
"I'm working on it!"
 
Vendor meet today at 1PM. Hoping to get carrier to admit to something

Michael
"Will Work For Food..."
 
You don't happen to have an ISDN Test Set do you? I know the one I use I can have it send out any # on CLID that I want to. But unfortunately that would take your whole circuit down. How is this D-channel and route configured? NI2, Custom, what?
 
No test set. I know the circuit is NI2.

Michael
"Will Work For Food..."
 
Can you make station-to-station calls okay? Maybe the issue isn't with the PRI, at all.
 
station to station is good.
site to site is good
just outbound, and only on specific dns
from one phone...
key 0 dn 3109 calls good
key 1 dn 3110 calls fail
key 2 dn 3102 calls good
key 3 dn 3103 calls fail

Michael
"Will Work For Food..."
 
Have seen this issue before, it was a carrier database issue. The numbers were not correctly assigned to the site in ALL the appropriate databases. Some of the numbers probably belonged to other people/companies, but when they gave them up, they were never deleted/removed correctly, so there is a mismatch in the databases and the carrier blocked it, not knowing what to believe.
Call your carrier back!
 
the carrier never showed up to the vendor meet... i am not very happy today...

Michael
"Will Work For Food..."
 
Threw out a Hail Mary to test.
Took a spare core card and programmed only the bare essentials.
All calls successful. Looks like database corruption on my CS1000...

Michael
"Will Work For Food..."
 
i guess time to reset and start over.
its all remote, so i guess i will be doing it across a modem connection. Fun Fun Fun

Michael
"Will Work For Food..."
 
Maybe out all those DN's. Do a data dump. Then sysload and rebuild 1 and see if it fixes it.
 
i might try that tonight after everyone is gone. anyone know how to remotely sysload?

Michael
"Will Work For Food..."
 
Depending on your release and version

Using PDT:
reboot <-- does an ini
reboot -1 <-- does a sysload

If on Option 11 or Mini:

LD 143
.XSL
the password is "ohno"


If release is 5.0 or above:

LD 135

.ini active

or

.sysload active

Find more at GHTROUT.com
 
No Go... Still not working.
Here is the game plan. I am taking my old Core card, having my vendor upgrade it to 4.5 then i will reprogram all the essentials and ship it to the problem site. after they swap them I will need to rebuild the extras (VGMC, CDP, VM...)
Thanks to all for your help. I wish the outcome was better, but at least I didnt lose my job.

Michael
"Will Work For Food..."
 
How are you going to program it without the dongle from the site?
 
This card already had a dongle in place.

Michael
"Will Work For Food..."
 
True, but your key codes need to match the dongle you are using at the site. Unless it doesn't have Call Pilot or Meridian Mail and your ISM's will work. Then I guess you are OK.
 
no CP, no MerMail (thank Christ!)
The vendor is regenerating the key codes for the H323 trunks.
Fortunately all of these systems were pooled together and software maintenance was kept through 4.5 so the upgrade isnt costing anything and the licensing can be moved around as needed.

Michael
"Will Work For Food..."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top