Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

opt81c 5.0 upgrade to cs1000mg sig server support

Status
Not open for further replies.

BCMTinkerer

Technical User
Feb 20, 2008
110
US
I performed a keycode upgrade on a 81c to convert to cs1000 and added a sig server, the keycode sheet reflects the system as being a cs1000 but in the system it still shows as being an 81c. After installing the sig server software and accessing element manager the web page shows Unknown call server type. The element manager home page does not cache the call server address.
When i access the pbx and run the command stat serve, i see that the pbx link as failed.
If i stat the SS it does not give me anything, it returns to the >: with no data returned.
Is it possible that the keycode file did not convert my system to a cs1000?
 
yes, very possible. what is the serial number.
 
Did you build a new host on the CS. In ld 137 dis enlk and enl elnk to bring up your elan.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top