OpenSace 4000 Trunk with OSB X8

[plokijuh]

Hi Guys.

Can you explain me how to configure trunk between OpenScape 4000 V8 and OSB X8.

OpenScape 4000 V8 has DIU-N2 board on 1-1-12 and OSB X8 has DIU-T2 on slot 10.

I've read alot of threads from this forum about creating trunks

https://www.tek-tips.com/viewthread.cfm?qid=1740928

https://www.tek-tips.com/viewthread.cfm?qid=1735761

https://www.tek-tips.com/viewthread.cfm?qid=1699048

https://www.tek-tips.com/viewthread.cfm?qid=1750087

but still can't get the point.

I don't understand when I should use CO or TIE; S2COD, S2CONN or HG3550IP; ESTI, ECMAV2 or CORNV33.

I would really appreciate for explanation.

 

[sbcsu]

What kind of connectors are you using - how are you connecting the link to the 4k

 

[plokijuh]

The connection was fixed and everything worked.

I did exactly like you advised, choosed appropriate LWPAR for both sides.

Thank you very much for your help sbcsu.

 

[sbcsu]

Good Stuff, make a note of all the settings and keep them for reference, screenshots if necessary.

 

[plokijuh]

Sure, thank you veru much sbcsu.