Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OP Problems

Status
Not open for further replies.

tomd110

Technical User
Sep 18, 2003
49
AT
Hi to you all!

On my mx1 system i have 3 ops (2 ows, 1 dbc 213)

--> opddp:dir=all; OPERATOR DIRECTORY DATA

DIR EQU OCUST TYPE PCM REV
5990 001-1-22-13 1 3 -
5991 001-1-20-00 1 4 -
5992 002-1-20-00 1 4 - -

5990 doesnt work fine, so i want to delete + reprogram it

command opere leads to following message

--> opere:dir=5990;

NOT ACCEPTED OPERATOR IS BUSY

although dir=5990 isnt busy

pls help
 
Hi.

Type OPTSP;

OPTSP;
OPERATOR TRAFFIC STATUS DATA
DIR BUSY/FREE ABSENT/PRESENT
37461 F A
37464 F P

WAITING TIME FOR OLDEST CALL IN QUEUE: 0 S
CORG WAITING CALLS OPERATORS PRESENT
1 0 1
2 0 1
3 0 1
4 0 1

Check for busy but absent.

Mpe
 
hi mpe


--> optsp;

OPERATOR TRAFFIC STATUS DATA

DIR BUSY/FREE ABSENT/PRESENT

5990 B A
5991 F A
5992 B P

WAITING TIME FOR OLDEST CALL IN QUEUE: 1 S

CORG WAITING CALLS OPERATORS PRESENT
1 1 1
2 0 1
3 0 1
 

Put 5991 off duty with F1, then send

RFPUI:UNIT=DOR&OLP1T&OLP1D,LIM=1;

then put 5991 on duty with F1 and remove 5990.

best parnum
 
hi parnum

--> RFPUI:UNIT=DOR&OLP1T&OLP1D,LIM=1;

Unconfigured command (RFPUI:UNIT=DOR&OLP1T&OLP1D,LIM=1)

-- cannot execute

 
Is this MX-ONE TSE?

If yes, instead of RFPUI you should do

restart -unit DOR,OLP1T,OLP1D -lim 1
 
thxs to you all

restart -unit DOR,OLP1T,OLP1D -lim 1 worked

all the best

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top