Hi All, im working on a cs1000m rls. 5.0 Im having trouble setting up the OSN when 911 is dialed i enter the information in ld24 under (ESA) but the system never asks for the osn in that setup under load 24! It will however let me program a OSN key on one phone.what am i missing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
On Site Notification (OSN)
- Thread starter camaro67
- Start date
TelecomNemo
Technical User
List the software packages in LD 22 ( req: prt, type: pkg). Make sure the PBX has packages 329, 330, and 331. I believe? that 330 allows for OSN. May even have OSN in the package name.
- Thread starter
- #3
TelecomNemo
Technical User
OSDN is the prompt in the ESA data block (ld 24)where the DN is defined.
You might want to keep these in mind too:
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
- Status
Similar threads
- Locked
- Question
