on call indicator

[fsoz]

went to an Avaya IPO406 v2 from a MICS. On internal calls you used to be able to tell if person you are calling was on the phone. Can the 5410 be programmed to do that.

 

[fsoz]

Still can't get that 5610 to work, it worked when I set the system up in December, must have changed something in the settings of the switch

 

[Bas1234]

Here is all the software:

http://support.avaya.com/css/appmanager/public/support/Downloads/P0160/5.0.x

And the manuals are here:

http://marketingtools.avaya.com/knowledgebase/businesspartner/

If you have questions hit F1 and read the manual. Otherwise come back and tell us what you have tried.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[fsoz]

Thanks, you guys are GREAT!!

 

[amriddle01]

Enjoy, but as of R6 (the most recent) upgrades require licencing, up to that it's free

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[fsoz]

Can a 406 v2 be upgraded to R6?

 

[amriddle01]

Yes, but as I say it's licensed around $200 I think, I would stick with R5 as there are many licencing/supported app changes with R6 that may not benefit you unless you really want some R6 only features

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[Bas1234]

yes it can

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[IPGuru]

Reduce call appearance buttons to 2
enable Busy_Last_CA on user

2nd call to user will now get busy or VM.

 

[amriddle01]

He kwows that Guru, he wants a visual indication before the call is attempted

ACS - IP Office Implement

"What the Crocodile Hat....was that?