hi,after upgrade to rls 5 ,vns dch do not work on port 3 for NTAK02 card for cPPm system,customer also tested the problem for rls 5.5 cppm system result is same not able to enable port 3 but for system SSC rls 5.0 everything is OK,anyidea?
Just incase you don't have a Nortel Login to view the Bulletin here is most of it:
Reissue Reason:
GPS has developed patch MPLR25183 for 5.0W systems using the VNS feature.
MPLR 25183 allows the VNS DCH to establish after upgrading to 5.0W
Patch is currently in LTD status and we are working to qualify it for GEN with in 10 Days
Any site that is upgrading with VNS should obtain the patch prior to upgrading.
Background:
NORTEL has received reports that after upgrade to 5.0 those sites using the VNS feature are unable to enable the
D-Channels associated with VNS. We have also received reports that new installs attempting to create new VNS
D-Channels are unable too.
Analysis:
Multiple reports from sites indicate that after upgrade to 5.0 the DCH is disabled and unable to establish. A new install has
also reported that the feature can not be implemented as they were unable to create new at 5.0 a VNS DCH
Recommendations:
All sites with VNS on lower releases and all new installs should carefully review the impact.
Loss of VNS service maybe a major impact to service.
There is not current work around or fix
Required Actions:
This alert to be updated each Friday until acceptable work around or fix available.
Attachments:
There are no attachments for this bulletin
Footer Information:
Retirement Reason:
Auto-Retired due to Reissue of Bulletin. Re-issued as 2008008557.4.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.