When I close down my BDC then go to logon to an NT Workstation there is no Domain present to log on to even though my PDC is still up and running.
Any ideas would be apprieciated.
Matt
This seems that you have a problem with name resolution. Are you using WINS or just lmhosts? If you are using WINS, are you sure that the machines do not have an lmhosts that it is conflicting with the information in the WINS server?
Are the BDC and PDC using lmhost that is conflicting with WINS? Are both the PDC and BDC also WINS servers? If they are, point both the Primary and secondary WINS under TCP/IP configuration to itself. If you have only one WINS then point both the PRIMARY and SECONDARY WINS for all DCs to the same wins IP.
-Both wins entries on your BDC are pointing to your PDC
-Both wins entries on the PDC are pointing to itself
-All other servers/workstations wins entries point to PDC
These must be in correct in order for workstations/member servers to find the IP address of domain controllers. If you are using DHCP for IP address assignment make sure you make these changes on your DHCP server so the correct addresses are issued.
You can do an ipconfig /all from the command line to determine the addresses used on a client configured for DHCP
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.