Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NS-500 will not boot

Status
Not open for further replies.

James Ako

Systems Engineer
Feb 14, 2022
14
GH
thread936-1806675
Hello
The system has been flashing green continuously and will not boot on the SD card. Anyone has an alternate solution?
 
Normally if it doesn’t boot it turns red, is the switch set to normal on the front. If it set ti initialise power off the system before returning or it will default the system.
 
obtsystems,
Thanks a lot, I have tried all this. I have set the switch to initialize several times and you see the flashing sequence change when you switch over to normal, but it still remains green and fails come back to normal service!
 
I would call for Tech support from an installer.
What is your procedure during initialisation?

Wanet Telecoms Limited
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top