Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NS-500 will not boot
- Thread starter James Ako
- Start date
obtsystems
Programmer
Normally if it doesn’t boot it turns red, is the switch set to normal on the front. If it set ti initialise power off the system before returning or it will default the system.
- Thread starter
- #3
obtsystems,
Thanks a lot, I have tried all this. I have set the switch to initialize several times and you see the flashing sequence change when you switch over to normal, but it still remains green and fails come back to normal service!
Thanks a lot, I have tried all this. I have set the switch to initialize several times and you see the flashing sequence change when you switch over to normal, but it still remains green and fails come back to normal service!
- Status
Similar threads