Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

not getting the ring back tone some times

Status
Not open for further replies.

BCU

Vendor
Mar 14, 2006
81
IN
Hi
we have nortel 61c in our office. Whenever we dial any mobile or ISD number the call is going through,but we are not hearing the ring back tone from the dialer phone. I have checked the DTR in LD 20 and all the ports were showing IDLE.Could you please tell me what needs to be check for this?

-Chandru
 
Please check
LD 21
Prt
type FTR
TTBL 0 (Tone Table)

Prt
Type RDB
Cust 0
Rout XX (IAO trunk)
DRNG yes
NDRI 1

LD 56
prt
type FTC
Tabl 0
RGBK (Ring Back Tone)
xton ?
xcad ?





NoypiToits
 
Hi
Please find the outputs
TYPE FTR_DATA
CUST 00
TBL
**DAPC**PREFIX TABLE NO: 00 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 00 0
PRIV*
E163* 00 0
TELX*
X121*
NATL*

OPT ABDA AHA BIND BIXA BLA BOHA CFF CFRA
COX CPA CTA DBD DNCA DNI DSX DRE
DSTD FACA HTU HVD XBL IC2 IDP XLF
IHA XTG FKA LOD LRA MCI MCTD CUI
MWUD NCD PCMD PSD PVCA RECA REA RNA
RTR RTD ROX SBD SDDE SIAD SLD EHS
THPD TTAD VOBD CWRD HLPD HRLD
CXOD BWTD
DGRP 0
IRNG NO
PKND 1
DNDL NO
SPRE 7898
LINK NO
PREO 1
BPSS NO
SRCD 0000
EEST YES
DTMF YES
EESD YES
TTBL 1
MUS YES
MUSR 40
HCC NO
ALDN
RECD NO
PORT 0
TFDR NO
RPA NO
MCDC NO
NAUT NO
IDEF YES
MTAR NO
LEND NO
MSCD NO
CPCI NO
CONF_DSP
CNFFIELD NO
CNF_NAME CONF
INTFIELD NO
INT_NAME I
EXTFIELD NO
EXT_NAME E
BSFE NO
ASPCT 000
FXS NO
DFLT_LANG ENG
STS_MSG
MSG01 Please leave message
MSG02 Back to work
MSG03 In a meeting
MSG04 On a conference call
MSG05 At lunch
MSG06 Busy call
MSG07 Out of the office today
MSG08 On a business trip
MSG09 Project deadline today
MSG10 Will reply after
VO_ALO NO
PCA OFF
PAGE 002
TPDN
BFS_CFW YES
VO_CUR_ZONE_ZDM NO
VO_CUR_ZONE_TD NO
________________________________________________
TYPE RDB
CUST 00
ROUT 1
DES TOUCHTEL PRI
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC EURO
CNTY ETSI
SBN NO
PNI 00000
NCNA NO
NCRD NO
CTYP NXX
INAC NO
ISAR NO
CPFXS YES
SDID NO
DAPC NO
INTC NO
MBXR NO
DSEL VOD
PTYP DTT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH RRB
TRMB YES
STEP
ACOD 75
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 1
NDNO 1 *
DEXT NO
DNAM NO
ANTK
SIGO STD
MFC NO
ICIS YES
OGIS YES
PTUT 0
TIMR ICF 512
OGF 512
EOD 13952


PAGE 002

NRD 10112
DDL 70
ODT 4096
RGV 256
GTO 896
GTI 896
SFB 3
NBS 2048
NBL 4096

IENB 5
TFD 0
VSS 0
VGD 6
DTD NO
SCDT NO
2 DT NO
DRNG NO
CDR YES
INC YES
LAST YES
QREC NO
OAL YES
AIA YES
OAN YES
OPD YES
NDP EXC 0
CDRX NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS YES
MRT 40
PANS YES
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TDET NO
TTBL 1
ATAN NO
PLEV 2
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 7070 1
SGRP 0
ARDN NO
AACR NO
______________________
RGBK
XTON 005
XCAD 031

Anything I need to change, please check and let me know.
-BCU
 
Ringback tone for outgoing external calls comes from the destination provider.
We get the same condition here sometimes depending on the cellular provider and maybe other circumstances that are outside the PBX control.
 
In your CDB, FTR_DATA and RDB
are using TTBL 1 (Tone table)

LD 56
REQ prt
Type FTC
TBL 1
User

LD 22
REQ PRT
TYPE ATRN (codec)
CODE 00 (MULaw)
CODE 02 (ALaw)

LD 97
REQ PRT
TYPE SYSP
INTN NO (MULaw)
YES (ALaw)

NoypiToits
 
Hi Noypi
Below is the required output.
ATRN
CODE 2
SOLR 12
ROLR +45.00
AOLR +45.00
TOLR -45.00
AGCD NO
VOLR NO
HRLR +42.00
HTLR -44.00
________________________
SYSP:
INTN = YES
QUIET CODE 0
THRESHOLDS 00004 00004
FLASH TIMERS 120 0896
TOHV 250
TDP 15
TID 150
TDPON 150
TPF 150 200
MFRL 2
MFTL0 00
MFTL1 00
XTRK MAKE/BREAK RATIO (PPS10) = 066
XTRK MAKE/BREAK RATIO (PPS12) = 066
XTRK MAKE/BREAK RATIO (PPS20) = 066
FAST DOWNLOAD CONTROL TABLE
CARD TYPE DOWNLOAD OPTION VERSION TYPE VERSION #
XNET CONDITIONAL CURRENT **
LCRI CONDITIONAL CURRENT **
XPEC CONDITIONAL CURRENT **
XNPD CONDITIONAL CURRENT **
FNET CONDITIONAL CURRENT **
FPEC CONDITIONAL CURRENT **
______________________________________________________________________________________________

RGBK
XTON 160
XCAD 031

Which one I need to change? If I give INI to the system will that resolve?

-BCU
 
RGBK
XTON 132

If you change the ATRN- COde and the SYSP- INTN, requires INI..


NoypiToits
 
Hi Noypi
for the last 7 years the PBX system was running with the existing configuration. Last 1 week I am facing this issue. Some times calls are going through and some times giving blank and busy tone(Cause 127: Internetworking Unspecified) error. Do I need to change as your previous email to make the phones work?

Regards
BCU
 
StanleySteamer (TechnicalUser)16 Mar 17 12:21
Ringback tone for outgoing external calls comes from the destination provider.
We get the same condition here sometimes depending on the cellular provider and maybe other circumstances that are outside the PBX control.

Like Stanley...stated above.
 
Some times calls are going through and some times giving blank and busy tone(Cause 127: Internetworking Unspecified) error." This issue will not solve by the previous email. Consult to Nortel Distributor in your area to update latest patches for your Nortel 61C.

NoypiToits
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top