Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Not getting back EDD000 after "Database backup Complete!"

Status
Not open for further replies.

Debrap37

Vendor
May 2, 2011
8
US

Does anyone know why I am not getting back EDD000 after a successful EDD backup? I am getting "." multiple times. Thanks!

OVL000
>LD 43
.EDD

DB SEQ NUM = 7311
CONFIG
PHYSICAL MAP
BCS TEMPLATE
PBX TEMPLATE
SUPER
IPMG
CUST
ACUST
CLID
ROUTE
DAPC
LTN TN
LTN LNK
TN
SCL
ESN 00
NCTL
ACD
ACD SCH
ACD IO
GRP DNS
CPK
NFCR TREES
ESA
IDC TREES
DIGITAL
DTI
ASNCH
AML / ELAN
VAS
TRSH
BG-TIME
BG-CAT
DCH
PRI
ARIES
FDL
SYSP
XTDT
MCAD
FCAD
FDCT
DTI2
FFC
LAPW
MSDL/MISP BLK
SOCKET ID BLK
TIME
DTI PDCA
PLUGIN
STS BLK
BKPR
BKPS
NODE
CPND NM
SPECIFIC DATA
HI
ALARM_MGT
ZONE_MGT
SYSCFG_MGT
ACCOUNT_MGT
ERL DB
SUBNET DB
ELIN DB
BANNER_MGT
NTP_MGT
ZBD ZONES DB
ZBD DB
MSC ZSRN DB
IPMG_MGT
SYSTEM_PARAMS
PORT_STATE_MGT
DVLA DB
HSEM DB
CHECKING

SIZE (KBYTES) = 242
DATADUMP COMPLETE


Backing up reten.bkp

Starting database backup
to local Removable Media Device
>Removing file "/cf2/backup/single/disk0001.dat"
>Removing file "/cf2/backup/single/keycode.kcd"
>Removing file "/cf2/backup/single/direct.rec"
>Removing file "/cf2/backup/single/config.rec"
>Removing file "/cf2/backup/single/database.rec"
>Removing file "/cf2/backup/single/hi/hi.db"
>Removing file "/cf2/backup/single/hi/cnib.db"
>Removing file "/cf2/backup/single/hi/cp.db"
>Removing file "/cf2/backup/single/hi/ipb.db"
>Removing file "/cf2/backup/single/hi/sutl.db"
>Removing file "/cf2/backup/single/hi/cnib368.db"
>Removing file "/cf2/backup/single/hi/hsp.db"
>Removing file "/cf2/backup/single/hi/inet.db"
>Removing file "/cf2/backup/single/hi/ipmgconf.db"
>Removing directory "/cf2/backup/single/hi"

>Removing file "/cf2/backup/single/zone.db"
>Removing file "/cf2/backup/single/eset1.db"
>Removing file "/cf2/backup/single/eset2.db"
>Removing file "/cf2/backup/single/node/node1000.btp"
>Removing file "/cf2/backup/single/node/node1000.cfg"
>Removing file "/cf2/backup/single/node/node1000.xml"
>Removing file "/cf2/backup/single/node/node.pch"
>Removing directory "/cf2/backup/single/node"

>Removing file "/cf2/backup/single/syscfg.db"
>Removing file "/cf2/backup/single/smpconf.db"
>Removing file "/cf2/backup/single/forwardlistfile.db"
>Removing file "/cf2/backup/single/pendingupdatemessagefile.db"
>Removing file "/cf2/backup/single/acct_002.db"
>Removing file "/cf2/backup/single/erl.db"
>Removing file "/cf2/backup/single/cdm.db"
>Removing file "/cf2/backup/single/cdmzones.db"
>Removing file "/cf2/backup/single/msczsrn.db"
>Removing file "/cf2/backup/single/elin.db"
>Removing file "/cf2/backup/single/subnet.db"
>Removing file "/cf2/backup/single/ntp.db"
>Removing file "/cf2/backup/single/mgc/0000/upgstat.dat"
>Removing file "/cf2/backup/single/mgc/0000/mgcdb.xml"
>Removing file "/cf2/backup/single/mgc/0000/mgc.db"
>Removing directory "/cf2/backup/single/mgc/0000"

>Removing file "/cf2/backup/single/mgc/0001/upgstat.dat"
>Removing file "/cf2/backup/single/mgc/0001/mgcdb.xml"
>Removing file "/cf2/backup/single/mgc/0001/mgc.db"
>Removing directory "/cf2/backup/single/mgc/0001"

>Removing file "/cf2/backup/single/mgc/0040/mgc.db"
>Removing file "/cf2/backup/single/mgc/0040/mgcdb.xml"
>Removing file "/cf2/backup/single/mgc/0040/upgstat.dat"
>Removing directory "/cf2/backup/single/mgc/0040"

>Removing file "/cf2/backup/single/mgc/0041/mgc.db"
>Removing file "/cf2/backup/single/mgc/0041/mgcdb.xml"
>Removing file "/cf2/backup/single/mgc/0041/upgstat.dat"
>Removing directory "/cf2/backup/single/mgc/0041"

>Removing directory "/cf2/backup/single/mgc"

>Removing file "/cf2/backup/single/system.ini"
>Removing file "/cf2/backup/single/customport.xml"
>Removing file "/cf2/backup/single/portstate.txt"
>Removing file "/cf2/backup/single/eptflag.db"
>Removing file "/cf2/backup/single/dvla.db"
>Removing file "/cf2/backup/single/hsem.db"
>Removing file "/cf2/backup/single/archive.dat"
>Removing file "/cf2/backup/single/reten.bkp"
KEYCODE
DIRECTORY
CONFIG
DATA
HI
ZONE
ESET1
ESET2
NODE
SYSCFG
SMPCONF
FORWARDLISTFILE
PENDINGCPMSGLST
ACCOUNTS
ERL
ZBD
NZON
ZSRN
ELIN
SUBNET
NTP
MGC
SYSTEM_PARAMS
PORT_CUSTOM
PORT_STATE
EPTFLAG
DVLA
HSEM
Backing up reten.bkp to "/cf2/backup/single"

Database backup Complete!


.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
 
It might be an idea to look at your TTY settings in case the one that you are using when carrying out the backup doesn't have the standard "USER" ones such as SCH, MTC or TRF etc.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
I would agree, make sure you have MTC, SCH and BUG. TRF should have nothing to do with it.
 
Thank you. Logged into TTY 0. Looks good to me. Any other thoughts?

ADAN HIST
SIZE 10000
USER MTC SCH BUG OSN
ADAN TTY 0
CTYP CPSI
DNUM 0
PORT 0
DES ENSDEVICE_IPC
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR NO
 
That print out looks odd. Why does it show the HIST and SIZE if you just printed out ADAN info for tty 0?
 
Pasted too much data. This is what it looks like.


ADAN TTY 0
CTYP CPSI
DNUM 0
PORT 0
DES ENSDEVICE_IPC
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR NO
 
It looks as if the command used was something like this below as it would print off the history file settings first before any of the TTY's as shown in my example.

REQ PRT
TYPE CFN

ADAN HIST
SIZE 65000
USER MTC SCH BUG
ADAN TTY 0
CTYP QSDI
GRP
DNUM 0
DES XSM_MONITOR
FLOW NO
USER MTC OSN
XSM YES
TTYLOG 0
BANR YES
ADAN TTY 4
CTYP CPSI
DNUM 4
PORT 0
DES 01222_545454_Tkr
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
XSM NO
TTYLOG 0
BANR NO
ADAN TTY 5
CTYP CPSI
DNUM 5
PORT 1
DES CPSI_CORE_1
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC TRF SCH BUG OSN
XSM NO
TTYLOG 0
BANR NO

What I find odd is that the text is offset and wasn't in the example shown above which is typical on all CS1000 type systems. Are there any TTY's on your system that doesn't has USER = SCH or MTC and BUG etc.

Do you have any "PTY's" configured?. Without wishing to sound rude, but are you accessing the system from the CPSI port "0"?.



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
No, all the TTYs are configured with USER = SCH MTC and BUG.
We are not connecting to a TTY that has a PTY configured. But there are two configured. TTY 13 and TTY 14
We are connecting to TTY 0

Not sure if we are connecting to CPSI port 0 since we are off site and using a VPN.


ADAN HIST
SIZE 10000
USER MTC SCH BUG OSN
ADAN TTY 0
CTYP CPSI
DNUM 0
PORT 0
DES ENSDEVICE_IPC
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR NO
ADAN TTY 1
CTYP MGC
IPMG 0 0
DNUM 1
PORT 1
DES VT520
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 0
BANR NO
ADAN TTY 3
CTYP MGC
IPMG 0 1
DNUM 3
PORT 1
DES Genesis_Chgs
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG
TTYLOG 66
BANR NO
ADAN TTY 13
CTYP PTY
DNUM 13
PORT 2
DES
FLOW NO
USER MTC SCH BUG OSN
TTYLOG 66
BANR NO
ADAN TTY 14
CTYP PTY
DNUM 14
PORT 1
DES
FLOW NO
USER MTC SCH BUG OSN

 
How are you connecting to TTY 0 if you are using VPN?
 
Last login: Tue Jun 14 14:09:09 2016 from 11.149.0.1

*******************************************************************************
* WARNING!!! *
* This system is solely for the use of authorized users for official purposes.*
* You have no expectation of privacy in its use and to ensure that the system *
* is functioning properly, individuals using this computer system are subject *
* to having all of their activities monitored and recorded by system *
* personnel. Use of this system evidences an express consent to such *
* monitoring and agreement that if such monitoring reveals evidence of *
* possible abuse or criminal activity, system personnel may provide the *
* results of such monitoring to appropriate officials. *
*******************************************************************************

Timeout is set to 3600 seconds.


Connecting to 1
[Enter `^Ec?' for help]
LOGI ********
PASS?
.
TTY #00 LOGGED IN ******* 13:05 14/6/2016

>
The software and data stored on this system are the property of,
or licensed to, Avaya Inc. and are lawfully available only to
authorized users for approved purposes. Unauthorized access to
any software or data on this system is strictly prohibited and
punishable under appropriate laws. If you are not an authorized
user then logout immediately. This system may be monitored for
operational purposes at any time.
****
OVL000
>
 
Hit the enter key at the end of the data dump, it's just a header identifier That says hey look, you are in ld 43. It really means nothing more than that. You should also see edd000 when you go into ld 43.
 
Once again, it really means nothing. Just an identifier and nothing to worry about.

EDD0000 Ready for commands.
 
@KCFLHRC - Debrap37 is not asking what EDD000 means - but why EDD000 is not being returned when entering LD 43 or when the EDD has completed. Not sure why you're not getting the EDD000, do you get EDD010 when you press the enter key while in LD 43? Try this - Go to LD 44 and type R 2 and wait till it finish and go into LD 43 and see if the EDD000 returns.

This is what suppose to happen when you enter LD 43
OVL000
>ld 43
EDD000


.
When you press the enter key, you should bet EDD010, follow by EDD000

.

EDD010

.
.
EDD000

When EDD complete, you should also see EDD000
Database backup Complete!

TEMU207 Backup process to local Removable Media Device ended successfully.

.
EDD000


.**



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top