Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel t7316E Phone to Phone programming 3

Status
Not open for further replies.

danchung85

IS-IT--Management
Jan 24, 2012
25
US
Hi everyone,

I'm having some trouble copying the programmed buttons on each phone. I thought going into the system via feature code **266344 would copy one handset program to another, however, i am finding that the buttons on the phone itself do not copy over.

Am I wrong to assume that there is a way to program just one phone and then copy it to multiple?
 
They will copy button for button as long: A) you are copying to the right set (F*0) to verify DN's and B) they are the same set type. As in you can't copy a T7616e to a T7316.


Marv ccna
 
To clarify, this is done through the system settings, under terminals & sets, from one DN to the other, correct?

If this does not work button for button and they are the same set type, what issues can there be that prevent button to button copying?
 
In the system programming, I go to -> Terminals & Sets -> Sets -> Ext # -> Copy: System Data -> Copy: single -> copy to new Ext #?

 
In the system programming, I go to -> Terminals & Sets -> Sets -> Ext # -> Copy: System Data -> Copy: single -> copy to new Ext #?"
When you get to System Data press CHANGE to show SYSTEM+USER & continue to -> Copy: single -> copy to new Ext #?
 
Thanks i'll give that a try. What happens if that does not work?
 
thanks, that worked! system data+user.. got it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top