Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Option 61C 1

Status
Not open for further replies.

ajaxx

Technical User
Jan 14, 2009
48
US
I'm trying to forward a analog phone to a outside number, but it wont let me. I have ncos of 2 and in the class of service I have cfxa. Is there something I am missing?
 
more info please how exactly have you set this up ?????

post the TNB of the set....
 

DES 5
TN 023 1 05 02
TYPE 500
CDEN DD
CUST 0
DN 6177 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN 0
NCOS 2
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBD XFA WTA THFD FND HTD ONS
LPR XRA CWD SWD MWD RMMD SMWD LPD XHD SLKD C C SD LND TVD
CFTD SFD C6D CNID CLBD AUTU
ICDA CDMD EHTD MCTA
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD AS C D
MBXD CPFA CPTA DDGA NAMA MIND
MCRD SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD PGND FT T U
PLEV 02
AACS NO
FTR CFW 8
FTR PHD
DATE 26 SEP 2011
 
After you forward do you print the tn to see if it is there? What happens?
 
how many didits are you sending out cos it's only set to 8 ....CFW 8 change it to say 12,,, try that
 
I tried 12 and 16 and it wont take. It's just a local number so I should only need 8. The ncos doesn't need to be higher does it?
 
worth a shot try NCOS 7,,, also are you using a 9
 
Yes using 9 I'll try ncos 7 and let you know. Thanks.
 
First of all you need to see if ncos 7 is even valid in the esn data block. If you can physically make the call from the phone then it's not an ncos issue.
 
Try:

cls = hta sfa
tgar = 0
ftr cfw 12

You also need to check that in LD 49 that the number being forwarded to is an allowed code,

And most importantly..... when setting the call fwd, is the user actually putting the access code in before the outside number????
 
You can CFW anywhere you can dial, if this is set:
Other notes:

LD49 ALOW/DENY is not common is the USA, so it is unlikey the problem.

SFA/SFD does not apply to this.

You have to do "#1 95551212" ~ "at the phone" and not in programming.

Most of the time it is the CFF/CFO. You need CFF

More about call redirection here:


--
Nortel Resources at GHTROUT.com World Famous!
--
 
Silly question, I guess User is familiar with the FFC (FlexFeatCode) for forwarding 'CFWA' Code on Analogue phones

Cheers!!
 
Thanks to everyone. It was the cff code.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top