Does anyone remember if you can modify a class of service in the Flash like you can in the call pilot?my mailboxes keep getting forwarded.thought you could do it with 983 and a 44 code but it didn't work
I also remember on some versions of Nam your could modify Class of Service thru teleset programming to change options of password expiry and outbound Transfer but can't remember how...
Ok Mobile in the dark with me ol eyes didn't work well lol.
"See our FAQ's tab"
How do you know it's forwarded?
Line Redirection?
Reception set Call Forwarded?
Usually its neither but rather the mailbox that has external forward but you say its a Flashtalk which would be impossible, you sure it's not Callpilot because you did say 3.1 which there is no such thing on Flashtalk.
Thanks for the FAQ redirect....I thought the same as you except when i looked at the flash programming on setting up the mailbox it had a setting for outdial setting for a line or pool and the older versions of Flash did not have that.Sort of leads me to believe it also allows for outbound transfer.
Just an FYI. It's a rarity, but there actually was a V3.1 software card near the end of production for the Flash. It allowed you to backup and restore from the software card.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.