Non U.S. Power for IP500

[jeepguy267]

I am a US based installer looking to intall an IP500 in a trailer (like what you see at a construction site). The trailer will then be put on a boat and shipped overseas. US is 120v and destination is 220V/50Hz. Do I just need a different power supply cable - or a different internal power supply - or a whole different IP500. Can any Euro installers out there provide part numbers for these variations? Any US installers dealt with this yet?

Here is a link to the plug type I will need to match.

http://www.yung-li.com.tw/EN/products/plug_cat_g.htm

Thanks

 

[big70]

The powersuppley is universal for 100V-240V

Because i shipped one to the US....

Greets Peter

 

[bdelmar]

What you would do is use the standard U.S. power lead and then get an adapter. Soemthing like one of these..

http://www.yung-li.com.tw/EN/products/adpt_euro.htm

 

[tlpeter]

Probably the customer will have a powerlead
I even have a couple at home


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[Bas1234]

Here is the SAP code 700289762

http://marketingtools.avaya.com/kno...Projects/installation/index.htm?sap_codes.htm

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[BurgerBen]

On the back of the IPO it's 100v - 240v
Ask your customer if the have a spare PC or kettle lead

Success is going from failure to failure without a loss of enthusiasm.Or is that another upgrade?

ACA - Implement IP Office

 

[edmana]

I was under the impression that since the IPO doesn't come w/ a power lead, it was for this exact reason...you may not know where it is going...

Also to make a buck on the lead...