Converting an old Nortel MICS to a new Avaya IP Office, customer has an old T1 with 24 channels of E&M Trunks for 2 way DID.
T1 is greened up and I can make outbound calls but can’t receive incoming, calling party hears silence, no ringing and times out to fast busy.
Current setting for channels,
Direction-Bothway,
Bearer-Any,
Type-E&M Swithed 56K,
Incoming Trunk-Automatic,
Outgoing Trunk-Winkstart
Provider is sending 4 Digits and I have programmed an Incoming Call Route with a destination to extension 221, Extension 221 can make outgoing calls.
Thank You for you help
T1 is greened up and I can make outbound calls but can’t receive incoming, calling party hears silence, no ringing and times out to fast busy.
Current setting for channels,
Direction-Bothway,
Bearer-Any,
Type-E&M Swithed 56K,
Incoming Trunk-Automatic,
Outgoing Trunk-Winkstart
Provider is sending 4 Digits and I have programmed an Incoming Call Route with a destination to extension 221, Extension 221 can make outgoing calls.
Thank You for you help