No tones on the phones

[Ghoulam]

Hi guys
I have one MD110 TSW SP3 version, there is no tone on all the phones, and when you call any extension; it rings one time and then stop, but the communication is established,
Is it the TMU board, that can do these two problems, I found an alarm about TMU but it's class zero:

324 FAULTY TMU BOARD
DATE TIME ALP NOIF EQU BRDID INF1
15MAY13 00:28:58 73 5 002-0-10-00 102 2

 

[nerdherder27]

Hi,
you can try software restart (RFBOI) or hardware restart of TMU board or change the board.

 

[himdp]

You say all the phones are affected, but the alarm is from LIM 2 in May!
Is the problem still there?
Is it in all LIMs?
Is it on analogue, digital, or both?
Any other alarms?
What lost signals (HIMDP)?

 

[Ghoulam]

Yeg all the phones lim1 & 2, digital & analogs
I don't have HIMDP sorry

the date is wrong

here are all alarms:

<ALLIP;
ALARM LIST
IDENTITY: EPC-1ALGERIA
VERSION: CXP1010123/4/TSWSP03/R4A

DATE: 22MAY13 TIME: 15:31:08
CODE CLASS NOAF EXPLANATION
15 2 1 DEVICE BOARD FAULTY OR MISSING
30 1 1 INCREMENTATION ALARM FOR ALARM CLASS 0
31 2 1 INCREMENTATION ALARM FOR ALARM CLASS 1
38 1 2 DISTURB. COUNTER INCREASED DUE TO FAULTY PROGRAM EXECUTION
40 1 1 EXCHANGE DATA RELOADED
45 1 1 LIM RELOADED AND RESTARTED
78 4 1 NO CONTACT WITH STANDBY SIDE
106 3 3 FAULTY I/O BOARD OR CONNECTED I/O DEVICE
114 1 3 DEVICE BOARD HAS BEEN ACTIVATED
115 4 1 SIGNAL PACKET LENGTH REDUCED
260 1 22 FAULT ON LINE TO INTERWORKING PABX OR PUBLIC EXCHANGE
269 4 1 DIGITAL TRUNK, LOSS OF FRAME SYNCHRONIZATION
274 2 1 DIGITAL TRUNK, CLOCK MALFUNCTION (SLIP)
278 3 2 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
320 1 2 HIGH CALL RATE
344 2 1 CIL, FAULTY CONNECTION TO NIU PORT

 

[zagali]

lscnp;

need to print and gjtsp:lim=all;
to final fault