Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Ringing tone

Status
Not open for further replies.

Bluemooner

Programmer
Feb 2, 2011
63
GB
Hi guys,

Got a bit of a weird one, Got a customer with an Avaya Definity. When anyone rings into the company the customer cant here the call ringing in their ear but the handsets ring onsite fine. I don't think it is a system fault and also Line provider don't think its a line fault anyone else had a similar issue.

Thanks

APSS - SME Communications
ACIS - SME Communications
ACSS - SME Communications
AIPS - Avaya IP Office
 
Is this a "did" call or after the call has been transfered to the handset?

...bob...
 
Hi Wellco,

It is a direct call from any external devise

APSS - SME Communications
ACIS - SME Communications
ACSS - SME Communications
AIPS - Avaya IP Office
 

You said "When anyone rings into the company the customer cant here the call ringing in their ear but the handsets ring onsite fine"

Which sounds like they are using a headset and are off-site. Are they telecommuting using one-X communicator/agent or IP Agent?

- Stinney

I love learning and passing on knowledge. "Because knowing is half the battle".... GI JOOOOOE!
 
If your talking about a "normal" call coming into the Definity from the outside world via a "did" trunk and the customer is not hearing ringback...but the station is ringing fine...go back to your service providor, they provide ringback not the PBX...ask them to fix the problem...Your probably getting the standard answer from them "Trouble is leaving here OK ! "

...bob...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top