Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No internet access whilst on Cisco VPN

Status
Not open for further replies.

x90syl

Programmer
Oct 11, 2009
26
GB
Hi,

The setup we have is a Cisco ASA 5505 with the split tunnel active which we all access via the Cisco VPN IPSec client.

I have an user, who uses a laptop with XP SP3, who connects successfully to the VPN and can do everything as if he was in the office except for the internet. The other users who use RDC can access the internet fine. I am guessing the VPN setup is fine as it works for some and not others but would appreciate any ideas on what I could check for possible causes.


Thanks & Regards
 
... forgot to say we have some users who are running with Vista, SP1 I think, and they can access the internet with no probs.

Still no ideas anybody?

Regards
 
Check the status of Stateful Firewall in Cisco "Options". Typically Always On is selected; however, depending on your network (dhcp vs static) you may need it off "no check".
 
Thanks JTubbs for response. I checked the options within Cisco but could find no mention of a stateful firewall? Where abouts exactly should I be looking please?

Regards
 
Folks:

I thought this has to do with split tunnel setup. Please look into split tunnel. Are you using CiscoAnyConnect client?

KC
 
Thanks kcbell for the response. The split tunnel is active and, I believe, is setup correctly as it is working fine for some users.

regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top