Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

no change ran conn licence counter

Status
Not open for further replies.

Radero0000

Technical User
Nov 15, 2007
23
MD
Hi!!!

Using a CS1000 e 7.50.
If I assign to a TN already configured some more RAN connection, after when I want to check how many licences left with the command slt in ld 22 i have not increased
the used licences counter, the same if i decrease the RAN conn .

If i do a sysload then i have the updated situation.
Regards

Raf
 
Sounds like another 7.5 glitch, there are plenty of them.
 
Are you using RAN or IPRAN? Are you also using regular ran or broadcast, can you copy your printout.
 
Hi
I am using RAN

DES RAN
TN 000 0 10 06 VIRTUAL
TYPE RAN
CUST 0
XTRK EXUT
TIMP 600
BIMP 600
AUTO_BIMP NO
RTMB 121 3
CONN 6
DATE 26 FEB 2012




REQ: prt
TYPE: rdb
CUST 0
ROUT 52

TYPE RDB
CUST 00
ROUT 52
DES xxxxxxxxxx
TKTP RAN
NPID_TBL_NUM 0
VTRK NO
CNDP UKWN
RTYP MLSS
GRD IDLE
REP 1
POST DIS
RANH
STRT DDL
WAIT RGB
BDCT YES
TITH 0
NCTH 0
ASUP YES
ACOD 7852
TARG 01
CDR NO
NATL YES
CFWR NO
IDOP NO
MUS NO
PANS NO
RACD NO
TTBL 0
OHTD NO
ALRM NO
TIDY 7852 52
SGRP 0
ARDN NO
CTBL 0
AACR NO


Thank you for helping me.
 
That's the way Broadcast Music Conn works. The license count will reflect the most connections used at the same time. It will only update when that count gets exceeded or a sysload is performed.

Maybe now Broadcast RAN is acting the same way.


 
you are all talking about a reload to have the right counting. But if I do an INI is the same? Or is not enough?


 
Hi people

We have just done an update on our cs 1000 rel 7 and now using the MAS, so now we have IPRAN, but unfortunately the problems is still there
about counting the ip ran connection.

here it's some printout:

iss

VERSION 4021

System type is - Communication Server 1000E/CP PM
CP PM - Pentium M 1.4 GHz

IPMGs Registered: 10
IPMGs Unregistered: 0
IPMGs Configured/unregistered: 0

RELEASE 7
ISSUE 50 Q +



TN 112 0 0 0
DATE
PAGE
DES

DES SDA_INI
TN 112 0 00 00 VIRTUAL
TYPE IRAN
CUST 0
XTRK IPMS
RTMB 252 1
CONN 48
DATE 20 NOV 2012



REQ: prt
TYPE: rdb
CUST 0
ROUT 252

TYPE RDB
CUST 00
ROUT 252
DES IP_RAN
TKTP IRAN
NPID_TBL_NUM 0
VTRK YES
ZONE 00252
NODE 1000
CNDP UKWN
RTYP MAS
GRD PLAY
REP 1
POST DIS
RANH
STRT IMM
WAIT RGB
BDCT YES
ASUP YES
ACOD 199252
TARG
CDR NO
NATL YES
CFWR NO
IDOP NO
MUS NO
PANS YES
RACD NO
TTBL 0
OHTD NO
ALRM NO
TIDY 199252 252
SGRP 0
ARDN NO
CTBL 0
AACR NO

> ld 14
TRK000
MEM AVAIL: (U/P): 97248502 USED U P: 5816984 586863 TOT: 103652349
DISK SPACE NEEDED: 818 KBYTES
ITG ISDN TRUNKS AVAIL: 0 USED: 0 TOT: 0
IP PEER H.323 TRUNKS AVAIL: 0 USED: 0 TOT: 0
AST AVAIL: 1310 USED: 40 TOT: 1350
RAN CON AVAIL: 15 USED: 233 TOT: 248
MUS CON AVAIL: 381 USED: 189 TOT: 570
IP RAN CON AVAIL: 146 USED: 4 TOT: 150
IP MUS CON AVAIL: 0 USED: 0 TOT: 0
IP MEDIA SESSIONS AVAIL: 166 USED: 4 TOT: 170
TNS AVAIL: 62015 USED: 3520 TOT: 65535
SIP ACCESS PORTS AVAIL: 0 USED: 400 TOT: 400
ELC ACCESS PORTS AVAIL: 0 USED: 0 TOT: 0
REQ


I'm using 48 ip ran connections but as you can see only shows 4 which are the first one i've applied for testing.

Any patch or solution

Thank you





 
Hi

After so long time we've got a solution from AVAYA-NORTEL. You have to apply a patch
The patch is: p31070_1.cpm

Before to apply the patch the counter has to be syncronized, and to do so you need a sysload.

Ciao

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top