Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NIU problem

Status
Not open for further replies.

rfboy

Programmer
May 27, 2005
14
0
0
NL
Hi,

A wierd probleme i have whit login with IP.
When i try to login i get ,

Login. I reponse with SSSSSSSSSSSSSSSSSSS;
Than a message apears,

Login reject

IONPP give the wright IP,MASk,GATE whats wrong???
I did restart the niu but still the same.
We have BC12 sp6

thx
 
HI CPKC

NETWORK1 1-0-60-4 IN SERVICE

 
try rfpui:unit=nip&fip&twp3,lim=1;

--------------------------------------
What You See Is What You Get
 
whosrdaddy,

I have done a complete restart from the lim but still nothing.

the only way to log in is by using the v24 port.

thx
 
Maybe someone made 3 faulty login attempts.
Then port blocks for 20 minutes.


______________________________
"Reload and Restart Requested
System Initiated"
 
summerdike,

No thats not the problem i'm the only one that can log in.
It's a standalone lim we use it for testing and learning porpuse.

thx
 
What number is shown on the lpu display?


______________________________
"Reload and Restart Requested
System Initiated"
 
try this IOEQI:EQU=1-0-60-04,IODEV=NET,TYPE=NETWORK;
 
Hi rfboy

SSSSSSSSSSSSSSSS
niux USER NAME:MDUSER
niux PASSWORD :
niux>start nif
close winfiol one minute after open winfiol connect to pbx


 
Is this an NIU or an NIU2?

Do a CNBIP on the BPOS, what REV is the firmware?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top