Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NIU problem

Status
Not open for further replies.

rfboy

Programmer
May 27, 2005
14
NL
Hi,

A wierd probleme i have whit login with IP.
When i try to login i get ,

Login. I reponse with SSSSSSSSSSSSSSSSSSS;
Than a message apears,

Login reject

IONPP give the wright IP,MASk,GATE whats wrong???
I did restart the niu but still the same.
We have BC12 sp6

thx
 
HI CPKC

NETWORK1 1-0-60-4 IN SERVICE

 
try rfpui:unit=nip&fip&twp3,lim=1;

--------------------------------------
What You See Is What You Get
 
whosrdaddy,

I have done a complete restart from the lim but still nothing.

the only way to log in is by using the v24 port.

thx
 
Maybe someone made 3 faulty login attempts.
Then port blocks for 20 minutes.


______________________________
"Reload and Restart Requested
System Initiated"
 
summerdike,

No thats not the problem i'm the only one that can log in.
It's a standalone lim we use it for testing and learning porpuse.

thx
 
What number is shown on the lpu display?


______________________________
"Reload and Restart Requested
System Initiated"
 
try this IOEQI:EQU=1-0-60-04,IODEV=NET,TYPE=NETWORK;
 
Hi rfboy

SSSSSSSSSSSSSSSS
niux USER NAME:MDUSER
niux PASSWORD :
niux>start nif
close winfiol one minute after open winfiol connect to pbx


 
Is this an NIU or an NIU2?

Do a CNBIP on the BPOS, what REV is the firmware?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top