Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nights and Main VM Pro

Status
Not open for further replies.

ZadroSolutions

IS-IT--Management
Oct 7, 2009
17
US
I'm tyring to do what I think is pretty simple, but having problems.

The client wants a "nights" button.

When not pressed, ring a couple extensions, and fall back to general hunt group vm greeting.

When pressed, go into auto-attendant (different greeting).

I have 2 groups set up:

- Main
- Nights

Main has fallback group set to "nights"

It seems that auto-attendant will only take the "main" route no matter if in night mode or not.

Any ideas?
 
Night service fallback>Night Service group>user forward to AA SC

Jamie Green

Football is not a matter of life and death-It is far more important!!!!
 
Build yourself a new group with vm on and queuing off and no members. Add this group to night service fall back group of your main group. You can manipuilate your main group leave point as day auto attendant and your new group.leave as night auto attendant.

You could also use a route by call status action in vm pro. It can tell when a group is in night service and take the alternate destination...different message.

There are probably a half dozen other ways to do this.

It's people like you who generalize.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top