Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Night Service

Status
Not open for further replies.

neebie

Technical User
Sep 17, 2007
4
US
Hello,

I am trying to setup call forwarding for NIGHT service on
a M2250 Meridan phone.I have the guide that shows me how to do this, but it makes references to TRUNCK ACCESS code and
MEMBER number in the steps.
Can anyone tell me how to find out the TRUNK ACCESS code or
even what it is.I assume MEMBER number would be the extension you are forwarding to.

Best Regards

Paul
 
Hi
Have a look in LD 21 for the ACOD
LD 21
REQ prt
TYPE rdb
CUST usaully zero
ROUT route out if you know it otherwise <cr> to get all the info
then look for the ACOD (access code)
also in LD 21
REQ LTM
CUST 0
ROUT enter the route if you know it otherwise <cr> back to REQ
This should show the trunk members

I hope this helps
Colin
 
Thanks, got the info i needed.
Now all is i have to do is figure out how to use the
attendant console to do this, the user guides are not much help
on this.

Best regards

Paul
 
Hi
What type of incoming lines do you have are they analog or digital ??

Colin
 
What i was trying to do was to, forward the call from the
operator attendant to another extension, for when she is on lunch etc, setting up the night service seems to be the best option for me.

Cheers

R
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top