Networking a BCM400 to a MICS

[Marine11702]

Having trouble networking a BCM400 4.0 to a MICS 30BwE02.

Keep getting "No Free Lines" whe trying to dial destination code 5 assigned to route 002 assigned to PRI-B. Same thing on the BCM side, only with 9 as the Dest code


HELP!

 

[Dasheen]

Have you assigned your IP trunks to bloc "x" on the BCM?

 

[RikRodgers]

What's the condition of the second PRI? Is it in synch? What's your timing set for? Need more info.

 

[Deweyhumbolt]

How is it a PRI-B? Is this a PRI P-P or VoIP Gateway to BCM?

Adversity is Opportunity

 

[Marine11702]

I have gotten it past No free lines on the MICS side. But now the BCM is not giving me an option to route call to Line pool BlocA. On the norstar side it is saying Lines in use. The BCM monitor is not seeing the T-1 at all.

 

[RikRodgers]

Timing?

 

[bigcat919]

Might want to try to deprovision and reprovision the channels of the T1. Or/and disable the T1 card then re-enable it. works most of the time.

 

[hawks]

Is this a T1 or a PRI? If it is a PRI then what protocol are you using?