Network/DHCP Question with 3300 CXII

[Cabarrus]

Two sites:

Site A will be the primary site and have a new Mitel 3300 CXII Controller with a PRI. We will have a HP Procurve 2610 POE switch with VLAN 1 for Data and VLAN 2 for Voice and the 3300 will be used as DHCP Server for the phones in the voice VLAN 2.

Site B is connected to Site A via a point2point T1 and will have a HP Procurve 2610 POE Switch , with VLAN 1 for Data and VLAN 2 for voice.

My question is how can the phones in VLAN 2 at Site B get DHCP addresses from the 3300 in Site A? It looks like you could create a second DHCP scope on the 3300, but i dont know how to get the phones from Site B to use the IP's from that second scope. The only method i can think of is to assign reserve ips (statics) in the DHCP of the 3300.

I would use the iphelper command in the procurve switch for vlan 2 at site b to let that vlan know about the mitel 3300 dhcp server.

Any help would be great.

thanks

 

[Cabarrus]

Ya, that fixed it. thanks for everyones help..