bigblock454
MIS
Hi All, azjeepgirl sent me an Avaya tech tip on using packet capture software to run my own NA, in an attempt to isolate the drop call issue (sorry if you're not familiar with this problem of the former 573dawn's, most here are). I have set up a PC with wireshark at my main location. I port mirrored the DS port to the PC, and I can merrily see all the packets flying by. However, since drops from the main location are almost unheard of, and primarily occur between the HWY & 21MM locations on a transfer, should I be mirroring the port that the HWY connects to rather than the port that the Main Site DS connects to?
Thanks! Dawn
Thanks! Dawn