I built a new 5.1 server.
Asus P4B533 - Celeron 1.7 GHz - 1.0Gig DDR - 120 Gig IDE 7200H/D - 10/100 3Com 905B-TX
Even though everything is working fine, I'm finding the speed of transfer is very slow. Ghosting(Imaging)a Lab of computers took 2 hours where it should only take 10-20 mins. I tested the cable runs and the NICs in all computers, everything fine.
Could it be the way I created the volumes?
1 x 0.200 Gig DOS Partition
1 x 119.8 Gig NetWare Partition
4.0 Gig SYS:<vol>
60.0 Gig DATA:<vol>
56.0 Gig DATA2:<vol>
Any Ideas?
Asus P4B533 - Celeron 1.7 GHz - 1.0Gig DDR - 120 Gig IDE 7200H/D - 10/100 3Com 905B-TX
Even though everything is working fine, I'm finding the speed of transfer is very slow. Ghosting(Imaging)a Lab of computers took 2 hours where it should only take 10-20 mins. I tested the cable runs and the NICs in all computers, everything fine.
Could it be the way I created the volumes?
1 x 0.200 Gig DOS Partition
1 x 119.8 Gig NetWare Partition
4.0 Gig SYS:<vol>
60.0 Gig DATA:<vol>
56.0 Gig DATA2:<vol>
Any Ideas?