Need manual or ini example for getting an AudioCodes MP-112 VoIP Gateway to work with an IPO v8.1 1

[Luzie67]

Regards this old tread

thread940-1692944

can someone point me to an manual or ini example
for getting an AudioCodes MP-112 VoIP Gateway to work with an AVAYA IPO v8.1.

On the MP-112 one port will be used for a fax machine.

Avaya VoIP-License is available.

Regards,

Luzie67

 

[Luzie67]

Some additional infos from INI of our MP122:

;**************
;** Ini File **
;**************

;Board: MP-112 FXS
;Board Type: 56
;Serial Number: 56xxx67
;Slot Number: 1
;Software Version: 6.60A.241.010
;DSP Software Version: 204IM => 660.10
;Board IP Address: 172.24.2.172
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 172.24.2.1
;Ram size: 32M Flash size: 8M
;Num of DSP Cores: 1 Num DSP Channels: 4
;Profile: NONE
;License Key limits aren't active full features capabilities are available !;
;----------------------------------------------

 

[intrigrant]

It is in dutch but the pictures are self explanatory, you'll figure it out

 

[intrigrant]

missing file, sorry Firefox crashed

 

[Luzie67]

Could you please upload the file again.

From your link I can´t download it.

Maybe because of the & character in the filename "IP_Office_&_AudioCode_MP1xx.pdf"
or it not right there on files.enginerring.com

Thanks!

 

[intrigrant]

Maybe this works better

 

[Luzie67]

Thanks, download was successful now

I´ll have a look, try and respond.

 

[Luzie67]

OK. First test not 100% successfull, but will try harder ...

First milestone was to detect, that we need to buy an "3rd party SIP endpoint license"
instead of the "Avaya IP endpoint licence" we have...

 

[intrigrant]

Of most importance indeed...
I'll dig into my harddrives for some config files, although I haven't done them for a year or two now I think they are still actual.

 

[Luzie67]

> I'll dig into my harddrives for some config files,
> although I haven't done them for a year or two now I think they are still actual.

OK. Will be very welcome, as I can´t get it to work
now on our firm IPO which has the "3rd party SIP endpoint license".
The port (Extension 164) on the MP-112 has state REGISTERED but when I try to call
an Extension (e.g. 130) on the IPO the only thing I see yet is something like "No Route"
in the MP-112 VoiP-State. I have to try again and post the real Routing-Error-Message.

 

[Bas1234]

Search here, a lot threads about mp112's

http://tek-tips.com/search.cfm?q=Mp112 bas1234&action=search

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[Luzie67]

OK. Thanks for pointing me to this threads.

Will try tomorrow and send my feedback.

 

[Luzie67]

On:

http://tek-tips.com/viewthread.cfm?qid=1696472

i found an example INI file which works with ip- and extension-changes on our IPO.
and MP-112 Software Version: 6.60A.241.010

But I got now face the same problems: Phone Calls from Extension to the Fax on the MP-112 are
received and I get short Fax-Tone from the Fax but then there´s silence.

Also sending Faxes is not successfull ("Disconnect from called party").

Re-Invinte is disabled on the SIP-Account and Codec set to G.711
Can we use T.38 ?
In MP-112 under VoIP / Media / Fax/Modem/CID Settings / Fax Transport Mode
can I leave this on setting: "T.38 Relay" ?

On MONITOR I for now see only that the call disconnects.

And here´s my actual INI:

;**************
;** Ini File **
;**************

;Board: MP-112 FXS
;Board Type: 56
;Serial Number: 5690967
;Slot Number: 1
;Software Version: 6.60A.241.010
;DSP Software Version: 204IM => 660.10
;Board IP Address: 172.24.2.172
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 172.24.2.1
;Ram size: 32M   Flash size: 8M 
;Num of DSP Cores: 1  Num DSP Channels: 4
;Profile: NONE 
;License Key limits aren't active full features capabilities are available !;
;----------------------------------------------


[SYSTEM Params]

DNSPriServerIP = 172.24.2.22
SyslogServerIP = 172.24.2.109
EnableSyslog = 1
NTPServerUTCOffset = 7200
VoiceMenuPassword = 'disable'
;VpFileLastUpdateTime is hidden but has non-default value
LDAPSEARCHDNSINPARALLEL = 0

[BSP Params]

PCMLawSelect = 3
RoutingTableHopsCountColumn = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

[Analog Params]

MinFlashHookTime = 70
FlashHookPeriod = 200
CountryCoefficients = 4

[ControlProtocols Params]

AdminStateLockControl = 0

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0
;3LevelNamingBChannelStartNum is hidden but has non-default value

[Voice Engine Params]

CallProgressTonesFilename = 'usa_tones_13.dat'
BrokenConnectionEventTimeout = 3
CallerIDType = 16
FaxRelayMaxRate = 3
CNGDetectorMode = 0

[WEB Params]

UseWeblogo = 1
;UseLogoInWeb is hidden but has non-default value
HTTPSCipherString = 'RC4:EXP'

[SIP Params]

MAXDIGITS = 20
ALWAYSUSEROUTETABLE = 1
REGISTRATIONTIME = 3600
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
ISWAITFORDIALTONE = 1
ISTWOSTAGEDIAL = 0
ENABLECURRENTDISCONNECT = 1
CHANNELSELECTMODE = 0
GWDEBUGLEVEL = 5
;ISPRACKREQUIRED is hidden but has non-default value
ENABLEEARLYMEDIA = 1
PROXYNAME = '172.24.1.21'
SIPGATEWAYNAME = '172.24.1.21'
CNONCE = ''
ALWAYSSENDTOPROXY = 1
DISCONNECTONBROKENCONNECTION = 0
SIPTRANSPORTTYPE = 0
MSLDAPPRIMARYKEY = 'telephoneNumber'

[IPsec Params]


[SNMP Params]


[ DspTemplates ]

;
;  *** TABLE DspTemplates *** 
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts.
;

[ \DspTemplates ]


[ PREFIX ]

FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID, PREFIX_DestSRD, PREFIX_CostGroup, PREFIX_ForkingGroup, PREFIX_LdapRulesSetId;
PREFIX 0 = "*", "172.24.1.21", "*", 1, 255, 0, -1, "", -1, "", -1, -1, -1, , -1, -1;

[ \PREFIX ]


[ TrunkGroup ]

FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 0, 255, 1, 1, "163", 0, 255, 255;

[ \TrunkGroup ]


[ ProxyIp ]

FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 0 = "172.24.1.21", -1, 0;

[ \ProxyIp ]


[ TxDtmfOption ]

FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 4;

[ \TxDtmfOption ]


[ IpProfile ]

FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference, IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode, IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed, IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection, IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption, IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain, IpProfile_VoiceVolume, IpProfile_AddIEInSetup, IpProfile_SBCExtensionCodersGroupID, IpProfile_MediaIPVersionPreference, IpProfile_TranscodingMode, IpProfile_SBCAllowedCodersGroupID, IpProfile_SBCAllowedCodersMode, IpProfile_SBCMediaSecurityBehaviour, IpProfile_SBCRFC2833Behavior, IpProfile_SBCAlternativeDTMFMethod, IpProfile_SBCAssertIdentity, IpProfile_AMDSensitivityParameterSuit, IpProfile_AMDSensitivityLevel, IpProfile_AMDMaxGreetingTime, IpProfile_AMDMaxPostSilenceGreetingTime, IpProfile_SBCDiversionMode, IpProfile_SBCHistoryInfoMode, IpProfile_EnableQSIGTunneling, IpProfile_SBCFaxCodersGroupID, IpProfile_SBCFaxBehavior, IpProfile_SBCFaxOfferMode, IpProfile_SBCFaxAnswerMode, IpProfile_SbcPrackMode, IpProfile_SBCSessionExpiresMode, IpProfile_SBCRemoteUpdateSupport, IpProfile_SBCRemoteReinviteSupport, IpProfile_SBCRemoteDelayedOfferSupport, IpProfile_SBCRemoteReferBehavior, IpProfile_SBCRemote3xxBehavior, IpProfile_SBCRemoteMultiple18xSupport, IpProfile_SBCRemoteEarlyMediaResponseType, IpProfile_SBCRemoteEarlyMediaSupport, IpProfile_EnableSymmetricMKI, IpProfile_MKISize, IpProfile_SBCEnforceMKISize, IpProfile_SBCRemoteEarlyMediaRTP, IpProfile_SBCRemoteSupportsRFC3960, IpProfile_SBCRemoteCanPlayRingback, IpProfile_EnableEarly183, IpProfile_EarlyAnswerTimeout, IpProfile_SBC2833DTMFPayloadType, IpProfile_SBCUserRegistrationTime, IpProfile_ResetSRTPStateUponRekey, IpProfile_AmdMode, IpProfile_SBCReliableHeldToneSource, IpProfile_SBCPlayHeldTone, IpProfile_SBCRemoteHoldFormat, IpProfile_GenerateSRTPKeys;
IpProfile 1 = "", 1, 0, 0, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 1, 0, -1, 1, 0, 0, -1, 0, 4, -1, 1, 1, 0, 0, "", -1, 0, 0, -1, 0, 0, 0, 0, 0, 0, 8, 300, 400, 0, 0, 0, -1, 0, 0, 1, 3, 0, 2, 2, 1, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0;

[ \IpProfile ]


[ Authentication ]

FORMAT Authentication_Index = Authentication_UserId, Authentication_UserPassword, Authentication_Port, Authentication_PortType;
Authentication 0 = "163", *, 1, "FXS";

[ \Authentication ]


[ ProxySet ]

FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive, ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap, ProxySet_SRD, ProxySet_ClassificationInput, ProxySet_ProxyRedundancyMode;
ProxySet 0 = 0, 60, 0, 0, 0, 0, -1;

[ \ProxySet ]


[ CodersGroup0 ]

FORMAT CodersGroup0_Index = CodersGroup0_Name, CodersGroup0_pTime, CodersGroup0_rate, CodersGroup0_PayloadType, CodersGroup0_Sce;
CodersGroup0 0 = "g711Alaw64k", 20, 0, -1, 0;
CodersGroup0 1 = "g711Ulaw64k", 20, 0, -1, 0;
CodersGroup0 2 = "g729", 20, 0, -1, 0;

[ \CodersGroup0 ]


[ RoutingRuleGroups ]

FORMAT RoutingRuleGroups_Index = RoutingRuleGroups_LCREnable, RoutingRuleGroups_LCRAverageCallLength, RoutingRuleGroups_LCRDefaultCost;
RoutingRuleGroups 0 = 0, 0, 1;

[ \RoutingRuleGroups ]


[ ResourcePriorityNetworkDomains ]

FORMAT ResourcePriorityNetworkDomains_Index = ResourcePriorityNetworkDomains_Name, ResourcePriorityNetworkDomains_Ip2TelInterworking;
ResourcePriorityNetworkDomains 1 = "dsn", 0;
ResourcePriorityNetworkDomains 2 = "dod", 0;
ResourcePriorityNetworkDomains 3 = "drsn", 0;
ResourcePriorityNetworkDomains 5 = "uc", 1;
ResourcePriorityNetworkDomains 7 = "cuc", 0;

[ \ResourcePriorityNetworkDomains ]


[ StaticRouteTable ]

FORMAT StaticRouteTable_Index = StaticRouteTable_InterfaceName, StaticRouteTable_Destination, StaticRouteTable_PrefixLength, StaticRouteTable_Gateway, StaticRouteTable_Description;
StaticRouteTable 0 = "", 172.24.1.0, 24, 172.24.2.1, "";

[ \StaticRouteTable ]

 

[Bas1234]

Don't use T38, make sure that the fax itself is set fixed to 9600baud inc/outg. And that ECM (error correction mode) is OFF

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[intrigrant]

For faxing I gave up on Audiocodes and use Patton M-ATA instead, minimal config 100% working, including T-38 faxing.

 

[Luzie67]

> For faxing I gave up on Audiocodes and use Patton M-ATA instead

OK. Sorry for the delay, but I now got the MP-112 to work.
Shortly before I go out to buy a Patton M-ATA ;-)

Sadly I don´t know for sure what has get the MP-112 going,
as I altered some settings on it and the IPO.

So here are some of my working settings from the AVAYA IPO,
than from the MP-112 and after this I paste my INI from the MP-112.

BIG THANKS goto Bas1234 and intrigrant for their help.


AVAYA IPO (from Avaya Manager)
SIP-Extension / VoIP Codec-Select / User-Definied / First: G.711 A-Law 64K,
Second: First: G.711 U-Law 64K

Support for Re-Invite: Enable -> Then we can set "Support for Fax-Transport" to: G.711

Settings MP-112:
Configuration / VoIP / Media / Fax/Modem/CID Settings / Fax Transport Mode was and is still set to:
T.38 Relay

Configuration / VoIP / Media / Analog Settings / FXS Coefficient Type was and is still set to:
USA (although setting this to "Europe" works also for me).

Configuration / VoIP / SIP Definitions / General Parameter / Fax Signaling Method is set to: G.711 Transport

Configuration / VoIP / SIP Definitions / Proxy & Registration / Use Default Proxy is set to: Use Default Proxy

Configuration / VoIP / SIP Definitions / Proxy & Registration / Proxy Name ist set to: 172.24.2.21
(=IP-Adress of Avaya IPO)

Configuration / VoIP / Media / Fax/Modem/CID Settings / Fax Relay Settings / Fax relay ECM Enable
was set from Enable to: Disable

Configuration / VoIP / Media / Fax/Modem/CID Settings / Fax Relay Settings / Fax Relay Max Rate (bps)
was set from 14400bps to: 9600bps

;**************
;** Ini File **
;**************

;Board: MP-112 FXS
;Board Type: 56
;Serial Number: 5690967
;Slot Number: 1
;Software Version: 6.60A.241.010
;DSP Software Version: 204IM => 660.10
;Board IP Address: 192.168.2.22
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 192.168.2.1
;Ram size: 32M   Flash size: 8M 
;Num of DSP Cores: 1  Num DSP Channels: 4
;Profile: NONE 
;License Key limits aren't active full features capabilities are available !;
;----------------------------------------------


[SYSTEM Params]

DNSPriServerIP = 192.168.2.1
SyslogServerIP = 192.168.2.139
;NTPServerIP_abs is hidden but has non-default value
NTPServerUTCOffset = 7200
VoiceMenuPassword = 'disable'
;VpFileLastUpdateTime is hidden but has non-default value
NTPServerIP = '192.168.2.1'
LDAPSEARCHDNSINPARALLEL = 0

[BSP Params]

PCMLawSelect = 3
RoutingTableHopsCountColumn = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

[Analog Params]

MinFlashHookTime = 70
FlashHookPeriod = 200
CountryCoefficients = 4
FXSCountryCoefficients = 66

[ControlProtocols Params]

AdminStateLockControl = 0

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0
;3LevelNamingBChannelStartNum is hidden but has non-default value

[Voice Engine Params]

CallProgressTonesFilename = 'usa_tones_13.dat'
BrokenConnectionEventTimeout = 3
CallerIDType = 16
FaxRelayMaxRate = 3
FaxRelayECMEnable = 0

[WEB Params]

UseWeblogo = 1
;UseLogoInWeb is hidden but has non-default value
HTTPSCipherString = 'RC4:EXP'

[SIP Params]

MAXDIGITS = 20
ALWAYSUSEROUTETABLE = 1
REGISTRATIONTIME = 3600
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
ISWAITFORDIALTONE = 1
ISTWOSTAGEDIAL = 0
ENABLECURRENTDISCONNECT = 1
GWDEBUGLEVEL = 5
;ISPRACKREQUIRED is hidden but has non-default value
PROXYNAME = '192.168.2.21'
SIPGATEWAYNAME = '192.168.2.21'
CNONCE = ''
ALWAYSSENDTOPROXY = 1
DISCONNECTONBROKENCONNECTION = 0
ISFAXUSED = 2
MSLDAPPRIMARYKEY = 'telephoneNumber'

[IPsec Params]


[SNMP Params]


[ DspTemplates ]

;
;  *** TABLE DspTemplates *** 
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts.
;

[ \DspTemplates ]


[ PREFIX ]

FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID, PREFIX_DestSRD, PREFIX_CostGroup, PREFIX_ForkingGroup, PREFIX_LdapRulesSetId;
PREFIX 0 = "*", "192.168.2.21", "*", 1, 255, 0, -1, "", -1, "", -1, -1, -1, , -1, -1;

[ \PREFIX ]


[ TrunkGroup ]

FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 0, 255, 1, 1, "20", 0, 255, 255;

[ \TrunkGroup ]


[ ProxyIp ]

FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 0 = "192.168.2.21", -1, 0;

[ \ProxyIp ]


[ TxDtmfOption ]

FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 4;

[ \TxDtmfOption ]


[ Authentication ]

FORMAT Authentication_Index = Authentication_UserId, Authentication_UserPassword, Authentication_Port, Authentication_PortType;
Authentication 0 = "20", *, 1, "FXS";

[ \Authentication ]


[ ProxySet ]

FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive, ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap, ProxySet_SRD, ProxySet_ClassificationInput, ProxySet_ProxyRedundancyMode;
ProxySet 0 = 0, 60, 0, 0, 0, 0, -1;

[ \ProxySet ]


[ CodersGroup0 ]

FORMAT CodersGroup0_Index = CodersGroup0_Name, CodersGroup0_pTime, CodersGroup0_rate, CodersGroup0_PayloadType, CodersGroup0_Sce;
CodersGroup0 0 = "g711Alaw64k", 20, 0, -1, 0;
CodersGroup0 1 = "g711Ulaw64k", 20, 0, -1, 0;
CodersGroup0 2 = "g729", 20, 0, -1, 0;

[ \CodersGroup0 ]


[ RoutingRuleGroups ]

FORMAT RoutingRuleGroups_Index = RoutingRuleGroups_LCREnable, RoutingRuleGroups_LCRAverageCallLength, RoutingRuleGroups_LCRDefaultCost;
RoutingRuleGroups 0 = 0, 0, 1;

[ \RoutingRuleGroups ]


[ ResourcePriorityNetworkDomains ]

FORMAT ResourcePriorityNetworkDomains_Index = ResourcePriorityNetworkDomains_Name, ResourcePriorityNetworkDomains_Ip2TelInterworking;
ResourcePriorityNetworkDomains 1 = "dsn", 0;
ResourcePriorityNetworkDomains 2 = "dod", 0;
ResourcePriorityNetworkDomains 3 = "drsn", 0;
ResourcePriorityNetworkDomains 5 = "uc", 1;
ResourcePriorityNetworkDomains 7 = "cuc", 0;

[ \ResourcePriorityNetworkDomains ]