I lose the use of the keyboard after hitting the slash key for the menu. I've deleted the directory and rebuildt it again. Still can't use the keyboard, i was told a line needed to be entered some with the following statement "keyboarddrv=sys". Does anyone know where this should be added or another fix for this issue. I don't think replacing the PC will help if this is the case.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC ICS MAT ISSUE LOST THE USE OF THE KEYBOARD
- Thread starter Yoref
- Start date
OzzieGeorge
Programmer
Which ICS? 120 or 140/160?
I'm assuming you aren't in the USA as the 120 is known there (and on this web site) as the IVS and the 140/160 I think continued to be known as the 2400.
I'm assuming you aren't in the USA as the 120 is known there (and on this web site) as the IVS and the 140/160 I think continued to be known as the 2400.
- Thread starter
- #3
OzzieGeorge
Programmer
Try Config.sys or possibly config.nt But saying that, I couldn't find the keyboard in my version.
belevedere
Instructor
If you still have the disks I suggest you verify the files against your directory files. See if any are missing. In that old DOS MAT the config files gets modified, so be careful replacing it.
OzzieGeorge
Programmer
If you are still struggling, get back to us as I have always just copied the dos files from one machine to another with just an addition to the system.ini file (you get garbage on the screen without it).
- Status
Similar threads
- Question