Dear All ,i've been lost and i had a very hard time with this unaccomplished project , so i wish i really hope that i can find any one here can help me .the case as below
NEAX 7400 ICS upgraded to NEAX 7400 IMX connecting to AVAYA S8720 server and G650 Media gateway the connection is ISDN/PRI TIE trunk ,over more than 6 months i'm trying to setup this connection correctly but i always failed the problem is finally is no caller id for both sides when i call from NEC to AVAYA i got the Trunk Name on the IPT display when i call from AVAYA to NEC i got "Call" on the wireless sets and i got "DDD" or "12024" on the digital NEC phone set .please let me know what is the right configuration i can do on NEC NEAX 7400 IMX.if you need any info from AVAYA please ask please help ,
i'll be grateful.
Thanks for help
Accept My regards
Ramy
NEAX 7400 ICS upgraded to NEAX 7400 IMX connecting to AVAYA S8720 server and G650 Media gateway the connection is ISDN/PRI TIE trunk ,over more than 6 months i'm trying to setup this connection correctly but i always failed the problem is finally is no caller id for both sides when i call from NEC to AVAYA i got the Trunk Name on the IPT display when i call from AVAYA to NEC i got "Call" on the wireless sets and i got "DDD" or "12024" on the digital NEC phone set .please let me know what is the right configuration i can do on NEC NEAX 7400 IMX.if you need any info from AVAYA please ask please help ,
i'll be grateful.
Thanks for help
Accept My regards
Ramy