I'm trying to figure out how this local 10 digit call (3033372500)is routed. From a LD80 entc trace on my set I believe I am taking Route 1. I have no NPA, NXX, SPN, HNPA, HLOC, LOC under AC1 (9) for 303. I do have an NPA for 1303 that is pointed at RLI 1 which has a DMI of 0, but DMI 0 does not exist. And an SPN 3 with and FLEN 0 pointed at RLI 0. Does anyone have any suggestions, any help is greatly appreciated? Below are various printouts.
I do not have entries in for 303 in NPA, SPN or NXX but do have a 1303 entry in NPA that points to RLI 1.
DMI for RLI 1 is 0 and there is not DMI 0 only a DMI 1 which just inserts a 9 (i'll have to look at why this is setup)
Code:
TN 020 1 01 03
KEY 0 SCR MARP ACTIVE TN 020 1 01 03 VGW
TN 000 V
ORIG 020 1 01 03 0 SCR MARP 0 5905 3904
[COLOR=#EF2929]TERM 019 21 DID RMBR 1 21[/color]
DIAL DN [COLOR=#EF2929]93033372500[/color]
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 73 TERM 23
EES_DATA:
NONE
QUEU NONE
CALL ID 0 8922
AUX NARS
I do not have entries in for 303 in NPA, SPN or NXX but do have a 1303 entry in NPA that points to RLI 1.
Code:
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn
[COLOR=#EF2929]SPN 303[/color]
ESN073
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn
[COLOR=#EF2929]SPN 3[/color]
SPN 3
FLEN 0
RLI 0
SDRR NONE
ITEI NONE
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE nxx
[COLOR=#EF2929]NXX 303
ESN073[/color]
REQ prt
CUST 0
FEAT net
TRAN ac1
[COLOR=#EF2929]TYPE npa
NPA 303
ESN073
NPA 1303
NPA 1303[/color]
RLI 1
DENY 5751235
DENY 960
DENY 976
SDRR DENY CODES = 3
ITEI NONE
DMI for RLI 1 is 0 and there is not DMI 0 only a DMI 1 which just inserts a 9 (i'll have to look at why this is setup)
Code:
REQ prt
CUST 0
FEAT rlb
RLI 1
RLI 1
ENTR 0
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ YES
ENTR 1
LTER NO
ROUT 1
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ YES
ISET 2
NALT 5
MFRL 0
OVLL 0