troubleshoot3r
Vendor
I have an Opt. 81C (just upgraded to Succ. 4.0) with a 201i Call Pilot on it and also installed a new Opt. 81 CS1000M in the new tower bldg. The PBX's (Opt. 81C) has two tie lines (PRI) between eath other. The phones in the new tower subscribed to the Call Pilot that is in the old tower (Succ. 4.0). I could call and leave messages between pbx's but I could not get the message light indicator to turn on in the new tower PBX (CS100M).
I have a D-channel on the PRI Tie Lines with
"RCAP = ND2 MWI" on both ends.
I appreciate all the help I could get. Thanks
I have a D-channel on the PRI Tie Lines with
"RCAP = ND2 MWI" on both ends.
I appreciate all the help I could get. Thanks