I’m having the following problem on my 81C. It doesn’t want to swap from CPU 1 to CPU 0 (Error Messages
SRPT095 HIRM: cnip 0 9 1 on the remote side 0 is Out Of Service. SRPT026 HB: Remote side health change: 24.
SRPT026 HB: Remote side health change: 26. SRPT096 HIRM: cnip 0 9 1 on the remote side 0 is In Service.
SRPT026 HB: Remote side health change: 24
SRPT026 HB: Remote side health change: 26
In the beginning I didn’t have any problems with this but for the last couple of days; I’m having music on hold problems. When someone on group 0shelf 0, say loop 32 phones an IVR internally the IVR plays when all the agents are logged in and busy, you are suppose to receive music but with no luck. When the number is dialed from externally the music on holds work fine.
When you phone the switchboard also on the same group and they put you on hold no music. But when you phone from group 1 shelf 1 all is working fine.
I’m looking to replace the Conf/TDS and Peripheral Signaling cards. But are not sure if this is going to solve my problem. Any Ideas?
SRPT095 HIRM: cnip 0 9 1 on the remote side 0 is Out Of Service. SRPT026 HB: Remote side health change: 24.
SRPT026 HB: Remote side health change: 26. SRPT096 HIRM: cnip 0 9 1 on the remote side 0 is In Service.
SRPT026 HB: Remote side health change: 24
SRPT026 HB: Remote side health change: 26
In the beginning I didn’t have any problems with this but for the last couple of days; I’m having music on hold problems. When someone on group 0shelf 0, say loop 32 phones an IVR internally the IVR plays when all the agents are logged in and busy, you are suppose to receive music but with no luck. When the number is dialed from externally the music on holds work fine.
When you phone the switchboard also on the same group and they put you on hold no music. But when you phone from group 1 shelf 1 all is working fine.
I’m looking to replace the Conf/TDS and Peripheral Signaling cards. But are not sure if this is going to solve my problem. Any Ideas?