Multi site NS700's to NS1000

[mpisano]

We have 5 sites all have been working independently on NS700's for years.

We decided to introduce a NS1000 at HQ and use our existing "Spoke and Hub" VPN to link all the sites together.

So all the 700's can call HQ (ie Hub), but they can't call "Site to Site" or "Spoke to Spoke".
Call rings, but no audio when answered.

If this was an Avaya, I would UnCheck "Direct Media Path"
Is there anything similar for Panasonic or do I need to create VPN tunnels between all the sites DSP cards?

FYI All the sites have Cicso ASA 505's - SIP INSPECT is off, Clear routes for all the 10. WAN traffic.

Appreciate the advise

Kind Regards,
Mike

 

[kizo]

Make a "One-Look" connection.
NS1000 is Master and NS700 are Slaves, and everything works as one PBX

There are no stupid questions, there are only stupid answers!