Hi,
i've just connect MSA1000 on an existing cluster with RA4000 array and i have some problems.
Servers seem to discover MSA1000 normally :
the command "list devices" gives me
0x0001 : [V502-A0-D0:0] COMPAQ MSA1000 FW:2.38 ID:0 LUN:0
I've already manage MSA1000 with smartsart and create logical volume...
Well, communication seems to be good but when i try to manage array with NSS, I can't.
"cpqonlin/array configuration utility/compaq 64/66 fibre host adapter in PCI slot x" return a warning : "There are no configurable controllers available in this system. Make sure both CPQFC.HAM and CPQSHD.CDM are loaded" (they are).
And i can't see MSA device in console one..
I have updated drivers, firmware, apply NSS post SP3c..
Is it a problem between my 2 fiber adaptater?
Is there a new cpqfc.ham to download (i see it in beta SP4 for netware)?
Thanks a lot for any suggestion.
i've just connect MSA1000 on an existing cluster with RA4000 array and i have some problems.
Servers seem to discover MSA1000 normally :
the command "list devices" gives me
0x0001 : [V502-A0-D0:0] COMPAQ MSA1000 FW:2.38 ID:0 LUN:0
I've already manage MSA1000 with smartsart and create logical volume...
Well, communication seems to be good but when i try to manage array with NSS, I can't.
"cpqonlin/array configuration utility/compaq 64/66 fibre host adapter in PCI slot x" return a warning : "There are no configurable controllers available in this system. Make sure both CPQFC.HAM and CPQSHD.CDM are loaded" (they are).
And i can't see MSA device in console one..
I have updated drivers, firmware, apply NSS post SP3c..
Is it a problem between my 2 fiber adaptater?
Is there a new cpqfc.ham to download (i see it in beta SP4 for netware)?
Thanks a lot for any suggestion.