Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Moving announcements 1

Status
Not open for further replies.

tone70

Technical User
Dec 14, 2007
238
US
What's the best method for moving announcements from a G450 to a VAL board? Thanks In Advance?
 
ftp, sftp, val manager, ASA can all be used to copy .wav files to and from announcement boards.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
VAl manager is the easiest once it's set up for the system. Otherwise it's

enable filexfer (valbord slot/port or mg/slot)

fill out the form
login
passwrod
re-enter password
secure
board address

using ftp client (WinSCP, Filezilla etc)
connect to the IP of the val board or gateway and move the file to your PC

be sure to add the announcement on the new system and keep the file name the same.

Do the above procedure in reverse to upload the file to the new location.
 
I've never had much success in getting VAM to work, it never finds my VAL boards. Is there some trick to the config?
 
what version cm are you on as long as you are not connected to cm in the same session in ASA juat click on the announcements tab and your good to go

APSS (SME)
ACSS (SME)
ACIS (UC)
 
I'm using version 4.0.11. I normally connect to the PBX using ProComm, make a difference?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top