Sep 22, 2015 #1 tone70 Technical User Dec 14, 2007 238 US What's the best method for moving announcements from a G450 to a VAL board? Thanks In Advance?
Sep 22, 2015 1 #2 AvayaTier3 Technical User Dec 31, 2008 4,600 US ftp, sftp, val manager, ASA can all be used to copy .wav files to and from announcement boards. A great teacher, does not provide answers, but methods to teach others "How and where to find the answers" bsh 40 years Bell, AT&T, Lucent, Avaya Tier 3 for 30 years and counting [URL unfurl="true"]http://bshtele.com[/url] Upvote 0 Downvote
ftp, sftp, val manager, ASA can all be used to copy .wav files to and from announcement boards. A great teacher, does not provide answers, but methods to teach others "How and where to find the answers" bsh 40 years Bell, AT&T, Lucent, Avaya Tier 3 for 30 years and counting [URL unfurl="true"]http://bshtele.com[/url]
Sep 23, 2015 #3 keschber Technical User Mar 10, 2010 104 US VAl manager is the easiest once it's set up for the system. Otherwise it's enable filexfer (valbord slot/port or mg/slot) fill out the form login passwrod re-enter password secure board address using ftp client (WinSCP, Filezilla etc) connect to the IP of the val board or gateway and move the file to your PC be sure to add the announcement on the new system and keep the file name the same. Do the above procedure in reverse to upload the file to the new location. Upvote 0 Downvote
VAl manager is the easiest once it's set up for the system. Otherwise it's enable filexfer (valbord slot/port or mg/slot) fill out the form login passwrod re-enter password secure board address using ftp client (WinSCP, Filezilla etc) connect to the IP of the val board or gateway and move the file to your PC be sure to add the announcement on the new system and keep the file name the same. Do the above procedure in reverse to upload the file to the new location.
Sep 24, 2015 Thread starter #4 tone70 Technical User Dec 14, 2007 238 US I've never had much success in getting VAM to work, it never finds my VAL boards. Is there some trick to the config? Upvote 0 Downvote
I've never had much success in getting VAM to work, it never finds my VAL boards. Is there some trick to the config?
Sep 24, 2015 #5 montyzummer IS-IT--Management Oct 6, 2010 2,999 GB what version cm are you on as long as you are not connected to cm in the same session in ASA juat click on the announcements tab and your good to go APSS (SME) ACSS (SME) ACIS (UC) Upvote 0 Downvote
what version cm are you on as long as you are not connected to cm in the same session in ASA juat click on the announcements tab and your good to go APSS (SME) ACSS (SME) ACIS (UC)
Sep 24, 2015 Thread starter #6 tone70 Technical User Dec 14, 2007 238 US I'm using version 4.0.11. I normally connect to the PBX using ProComm, make a difference? Upvote 0 Downvote