electronicsfreak
Technical User
Works fine with my I3 but with that, it turns on then back off. I have checked to make sure voltage is set right, which it's set to auto detect anyway. Did this while the I3 was in to see what voltage was set at. Gigabyte cpu support shows this cpu is supported by my board. I did get it off ebay but starting to think it's bad. But thought id check on here to see if anyone has any suggestions.
My current specs
Gigabyte z68xp-ud3
Gskill 16GB 1066 ripjaw memory(4 x 4GB sticks)
Intel I3-2120 3.2Ghz
Evga 780TI classified video card
Rosewill 950 watt 80 amp power supply
Let me know if you want anything else.
There is a point in wisdom and knowledge that when you reach it, you exceed what is considered possible - Jason Schoon
My current specs
Gigabyte z68xp-ud3
Gskill 16GB 1066 ripjaw memory(4 x 4GB sticks)
Intel I3-2120 3.2Ghz
Evga 780TI classified video card
Rosewill 950 watt 80 amp power supply
Let me know if you want anything else.
There is a point in wisdom and knowledge that when you reach it, you exceed what is considered possible - Jason Schoon