Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monitor trace

Status
Not open for further replies.

reebokman

Technical User
Aug 9, 2007
71
Hi,

Any body seen the following mesage on monitor trace? and what does it mean?

"Card is returning all zeros for the OCR register
 
SD Card?

do you have the SD card installed?

ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
turn on "memory card commands" under "services" in monitor.
Maybe you will see more.
What version is your IPO on?
If 6.0.8 or 6.0.14 then be worried :)


BAZINGA!

I'm not insane, my mother had me tested!
 
Eject the card and re-insert. I have seen this at least a dozen times in the past month. You will want to power cycle it to do this.

Kyle Holladay / IPOfficeHelp.com
ACSS & APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
 
I've seen it too a few times over the last couple of weeks. Last time it happened was after a config change and merge. Just powered down the system and made sure the SD card contacts were clean. Put the card back in and the system came up without a problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top