Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modem Toggling between active and stanby servers

Status
Not open for further replies.
notbrokedontchangeit

notbrokedontchangeit

Technical User
Jun 21, 2005
111
0
0
GB
Has anyone seen this before?
I have an two S8700 duplicated servers running CM 3.0 with the latest patches on them but when I dial into them the modems toggle between the active and standby instead of just answering on the active server. The modems firmware has been upgraded.
Any ideas?
 
Sort by date Sort by votes
Just wait and give the modem the time to disconnect. If you're dialing directly again after hanging up the modem of the active server will be still busy and the standby will answer.
 
Upvote 0 Downvote
We are not dialling the server immediately after it is quite a bit of time afterwards. So the active will have had time to go to stable
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

smitj11
  • Locked
  • Question
SNMP between G430s and CM?
Replies
10
Views
83
smitj11
smitj11
hebegb41
  • Locked
  • Question
Avaya Definity G3 INADS and remote access modem
Replies
5
Views
131
AvayaTier3
AvayaTier3
hcmbmt
  • Locked
  • Question
Uniform dialing plan via H.323 between CM and IPO not working
Replies
1
Views
61
hcmbmt
hcmbmt
MohamedSami
  • Locked
  • Question
EPM active calls missing ANI calling numbers
Replies
1
Views
64
MohamedSami
MohamedSami
dianvaguar
  • Locked
  • Question
Collaboration between two standalone Avaya Aura Core PBXs
Replies
2
Views
51
jimbojimbo
jimbojimbo

Part and Inventory Search

Sponsor

Back
Top