There is Avaya s8300 Server, Avaya G700 Gateway, Avaya MM710 module and Avaya MM711 module.
Everything worked properly. But it needed to carry all the equipment to a different location, change the ip address and the gateway to the P330, MGP and to VOIP server.
After that, everything worked except the module Avaya MM711.
The output of the command list configuration all the module MM711 in no board state.
Tell me what is the reason for this: that it should be corrected due to change ip address and gateway, or is physically moved contact?
Everything worked properly. But it needed to carry all the equipment to a different location, change the ip address and the gateway to the P330, MGP and to VOIP server.
After that, everything worked except the module Avaya MM711.
The output of the command list configuration all the module MM711 in no board state.
Tell me what is the reason for this: that it should be corrected due to change ip address and gateway, or is physically moved contact?