Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIVB9 upgrade half way

Status
Not open for further replies.

Tinos

Technical User
Nov 5, 2014
710
BW
Hi all.
I have a 3300 hundred which I was upgrading to mivb9 and it failed on the halfway mark. Now it keeps on booting showing the below. I tried the reverse migration procedure and it fails with an error below. How can I take it back to the previous release?
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=>
Press <SPACE> key 3 times within 7 seconds to stop autoboot
=> run upd_bootrom_fromdisk
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
bootrom.bin download failed
=>

Thank you.
 
Does the HDD boot in another pre 9.0 system?

From the migration guidelines pg. 41 you could try the below.

NOTE: You must know the active partition number of the hard disk (1 or 4) to boot the pre-9.0 MiVoice Business software load properly (see Before you Begin).

Run the following commands to configure U-Boot to boot VxWorks from the new disk drive:
Code:
setenv vxworks_active_partition <1 or 4>
setenv bootcmd run loadvx_ata
saveenv
boot
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top