jchallenor
Vendor
does anyone have a copy of the Mitel Telnet Client...we have a 200ICP r2, no web access (until we upgrade it)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mitel Telnet Client
- Thread starter jchallenor
- Start date
- Status
TheMitelGuy
IS-IT--Management
Any secure telnet client will work.
- Thread starter
- #3
jchallenor
Vendor
Any suggestions, I've tried several (just tried Secure CRT) with no luck.....
TheMitelGuy
IS-IT--Management
Did you do the <IP_Address> 2000
???
You have to put 2000 after words or it won't work.
???
You have to put 2000 after words or it won't work.
- Thread starter
- #5
jchallenor
Vendor
yes, set port to 2000, and still no go.
If you just do a telnet from a dos prompt with 2000, the Mitel responds that it needs TLS/SSL telnet client.
If you just do a telnet from a dos prompt with 2000, the Mitel responds that it needs TLS/SSL telnet client.
TheMitelGuy
IS-IT--Management
Your client needs to support SSL. Did you client on ENABLED SSL for that connection?
- Thread starter
- #7
jchallenor
Vendor
that's one of the big problems, the connection type on most of these programs is telnet, ssh1, ssh2...I don't find any ssl......what program do you use?
TheMitelGuy
IS-IT--Management
Type "Telnet w/SSL" into Google, pulled up a lot of free trials.
- Thread starter
- #9
jchallenor
Vendor
there must be something up with the 200ICP....just tried Powerterm and same thing, it's looking for SSH/TLS client.
I don't get that message when I use port 2000.
I don't get that message when I use port 2000.
- Thread starter
- #10
jchallenor
Vendor
For security reasons, a TLS/SSL enabled telnet client MUST be used to connect
this is the message I get from the 200ICP no matter what combination settings I seem to use...
this is the message I get from the 200ICP no matter what combination settings I seem to use...
- Thread starter
- #11
jchallenor
Vendor
I got PowerTerm to work once....now it won't connect again.......I'm going to try a reset. I would love to get a copy of the Mitel Secure Telnet client. I understand it comes on the CD that came with the system and it's free to download for Mitel dealers.
MitelInMyBlood
Technical User
Why not just upgrade to release 3 and then you can surf to it through your browser?
TheMitelGuy
IS-IT--Management
There is nothing special to it, it's an open-source version from a university.
Hey JChallenor,
I had the same problem. Mitel made it so hard in Release 2 for me to access the system. Before I could do it from any computer with hyperterminal but now I had to find a program that would work. The first one I tried from the Mitel website sucked. It ran in DOS and it wouldn't show the buttom options once in the system, it was HORRIBLE. Then I found another one on there that works great and I would recommend to anyone. Just go to the Mitel FTP.
Matthew McGowan
Reynolds Park
I had the same problem. Mitel made it so hard in Release 2 for me to access the system. Before I could do it from any computer with hyperterminal but now I had to find a program that would work. The first one I tried from the Mitel website sucked. It ran in DOS and it wouldn't show the buttom options once in the system, it was HORRIBLE. Then I found another one on there that works great and I would recommend to anyone. Just go to the Mitel FTP.
Matthew McGowan
Reynolds Park
Mitelpassion
IS-IT--Management
guys, not sure if it's the same on the sx but I use "putty" on the 3300.
maybe it could work
maybe it could work
TheMitelGuy
IS-IT--Management
Which Mitel FTP site are you talking about? Where?
TheMitelGuy
IS-IT--Management
I'm not seeing a SX-200 folder? Where do I go to find this? I usually just get it from the CD.
go to ftp.mitel.com go to the outgoing folder
or just follow these folders. program is TN3270. its great!
ftp://ftp.mitel.com/Outgoing/SX200ICP/SecureTelnet/TN3270/
Matthew McGowan
Reynolds Park
or just follow these folders. program is TN3270. its great!
ftp://ftp.mitel.com/Outgoing/SX200ICP/SecureTelnet/TN3270/
Matthew McGowan
Reynolds Park
- Thread starter
- #20
jchallenor
Vendor
How does one get a login/password for the ftp site?
BTW, TN3270 works GREAT!
BTW, TN3270 works GREAT!
- Status