Mitel MCD 5.0 CX won't reinstall software

[christiankarl]

hi guys,

im not able to reinstall mcd software from my CX with mcd 5.0 sp1 load.

during boot, this is what it looks:

MITEL SYSTEM ROM R3.1/10 Aug 5 2011

CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 512
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f6bc81c
L2 Switch : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0

Starting POST...

SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED

Starting vxWorks...



Reset Cause : 0x13 - CHECK_STOP_RESET












VxWorks System Boot


Copyright 1984-2002 Wind River Systems, Inc.





CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/10
Creation date: Aug 5 2011, 18:41:11



Exception at interrupt level:

machine check
Exception next instruction address: 0x0003bde0
Machine Status Register: 0x00041000
Condition Register: 0x80000044
Regs at 0xfef8


Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 192.168.2.52:ffffff00
host inet (h) : 192.168.2.59
gateway inet (g) : 192.168.2.1
user (u) : ftp
ftp password (pw) : ftp
flags (f) : 0x0
other (o) : FixPartition

Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading... 8342832
Starting at 0x10000...



MITEL SYSTEM ROM R3.1/10 Aug 5 2011

CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 512
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f6bc81c
L2 Switch : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0

Starting POST...

SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED

Starting vxWorks...



Reset Cause : 0x13 - CHECK_STOP_RESET

what does it mean under the "machine check" line?

 

[DomingoDolores]

have you tried reinstalling the SW form vxworks CLI?

The problem with TCPIP jokes is that when I tell them, all I want is an ACK but usually get FINs and RSTs

 

[Lundah]

Machine Check is the system telling you it found a non-recoverable hardware fault. But your boot device in the boot options looks wrong, it should either be "ata=0" or "motfcc".

 

[christiankarl]

thanks for the replies,

i was able to fix the issue by deleting the partition of ssd harddrive from pc then put it back to 3300.