Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel IP-DECT (Ascom) base station to Wireshark

Status
Not open for further replies.

Joekske

Technical User
Oct 11, 2010
10
BE
Hi all,

Does anyone know how to setup Wireshark after you have checked the TCP/UDP traffic and enable Wireshark?

image_jcfc3q.png
2020-02-24_16_00_07-Windows_10_x64_-_VMware_Workstation_gfzalj.png



I have tried with the new version and version 1.7.1 from Wireshark.
2020-02-24_16_12_50-Windows_10_x64_-_VMware_Workstation_pqic7k.png



Any help will be appreciated;

Joekske
 
I'm not at work this week, so I cannot check my notes.
But from memory, you should use the 32bit version of wireshark.


 
the bases are rebadged ascom
found the attached online that details how to do handset captures

Not sure what kind of capture you were trying to do but the tecnique detailed in appendix D might help

If I never did anything I'd never done before , I'd never do anything.....

 
 https://files.engineering.com/getfile.aspx?folder=3fb413df-2035-4976-b0e3-3e812b031f06&file=tg_vowifi_td92685en.pdf
Hi all,

I have got this working on the latest Wireshark version (64 bit version)
I don't know why it now works but it does.

Thank you all for the replies!

Joekske
 
Joekske,
Would you like to try to explain the steps you did?
That would help me too.
Maybe screenshots, if different?
 
Hello meneerB,

Sorry for the late response, but I hope this still helps you out.

1) in Wireshark go to manage interfaces. Go to the tab pipes.
2) Add a new pipe with the plus on the bottom and past the rpcap://*ip-address*/trace from the base station in to the field.

Now when you press oke and go back to the pipes tab you will see that the pipe is not saved.
What you have to do is add a new pipe after step 2. You can remove it or press oke, but now you will have the pipe added to the interfaces.





2020-03-10_21_22_28-Window_poypmy.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top